Forum: Pool Electronics

I have the Aqualink RS system now. The PDA failed so I have only manual control. Since replacements are no longer available Jandy suggested I...

CPHVLEDS100 Jandy LED lights first one was dead within 3 years, the 2nd one dead on open in year 4. Hardly ever used. Salt water pool LED's...

I have an Aqua logic control that wont keep time, I have to manually change the day and time everyday, could not find any backup battery and the pool...

We are considering a pool alarm (like the one where water disturbance sounds an alarm in case a child falls in). However, I've reviewed many of...

I've come into (begun renting) a pool that appears to have a disregarded fiber optic lighting system. It appears to have circumference lighting under...

Happy to have found this site. Hopefully will find some useful information/help from DIY's here. Right now, wondering about WiFi for Pool...

I have a 10’ X 30” summer waves easy set pool. It is storming for the first time since I set up and I unplugged the filter and left the power adapter...

Hello All, I'm new to the Salt Water Pool ownership and had a few questions about the Hayward OnCommand System currently installed. It seems to...

Early Spring we converted to a Jacuzzi Saniclear 40 salt system. The box that is on the house gets VERY hot. This morning when I turned it on it...

We replaced our 2speed pump with a pentair super flo 2speed pump. Our existing wires were 2 blue hot and 1 green ground. We plugged the hot in and...

My pool pump stopped working today. It is a Hayward 3400 SVP. The error code i am getting is. Check System communication failed check wiring...

Hi, My old Hayward system fired during lightning. Have lightning rods now and surge protection now. What is the best system? I like the...

I have swapped my old inefficient pump with a Hayward Ecostar SP3400 VSP. The plumbing is complete; however, my breaker keeps tripping when I start...

Several years ago I asked for a wiring diagram for using my X10 remote to control my 2 speed waterfall pump, it gave me remote control of the low and...

Just wondering if anyone has added one of these to their pool? I wish my pool was plumbed for it but it's not and during the hot AL summers I'm...

I just had my liner replaced 30 days ago after 1.5yrs due to liner seam failure.13,700 gal Originally used all bioguard stuff that the pool store...

Hello! I live in the Sacramento Valley, CA and have a 1969 in ground plaster pool. I had the surrounding concrete replaced and found that the...

I have checked the wiring and installation, all is good there. Can't get the Aquapure ei to connect to the iaqualink. Any suggestions?

Hey Guys / Gals, Hope everyone is doing well...... so glad it's summer! My water and yard are looking great. Just got back from 9 days on the...

Long-time pool owner.... new to the forum. I just had a Zodiac iAqualink controller installed. It replaced a 16-year-old Aquadyne Mini panel. The...

I have a Hayward H100ID1 that needs a new blower, I know the blower / moor is made by Jakel. I also see that Fasco makes an upgrade but I'm...

all the lights where coming on on my indoor panel. codes 6700 rev c and 8157 rev I replaced nine volt battery outside in control box. indoor...

I have 3 pole lights around my pool that have stopped working. I ran a diagnostic on my Aquling RS8 and it showed the solar Aux3 circuit "open"...

Hi, I have just encountered a problem with the spillover on my hot tub. When I activate the hot tub (heating etc) the spillover stays on (obviously...

It's been a little touchy lately, but now when I turn on the heater, I just get a click at 5 seconds, and a faint smell of gas. My guess is that the...

I have a 18x36 in ground salt water pol that is about 6 years old. I currently have a Hayward Aqua plus gold line control. I am starting to have...

We are installing a 17x35 shotcrete pool with a 7x8 spa and automatic pool cover. The coping was just poured. I would like to have a pool...

New pool with intellibrite 5g multi color light and intellibrite controller. Upon pushing the power button only the red lights up in all settings on...

My pool filter and cleaner did not automatically come on today. In the past whenever this happened, I would depress the Reset button and be able to...

Support from Polaris (now Zodiac) these days is pretty much nonexistent. The system was only around for a couple of years before Polaris was bought...