If you are getting, or have, an Intex type pool, this is the place for questions about site prep, setup, pumps, filters and operations.
There are so many configurations and some many threads out there, i will be trying to update this as i go. How to convert a Summer Escapes to...
_____________________________________________ I've discovered there are at least 3 Chinese manufacturers supplying 'Intex-type' pools to the US...
Intex (www.intexcorp.com) has a wealth of information on their website for their customers, but it's often hard to find. And, if you find it, it can...
Here's a quick list of cleaning and maintenance tools many have found helpful; feel free to add to this thread items that have worked well for you. ...
______________________________________________ FAQs & Guides for Intex, Bestway, Coleman, etc, ______________________________________________ ...
We have acquired an AGP, given to us by a family member. It's a 15'x48" tube frame, model A 15' x 48" F B02 R1, and I'd like a bit of advice on the...
HI everyone! Is there an EASY way to level a 24x12 area of ground without renting a CAT, etc. etc? We have the Ultra 12x24 Pool and we were 6 inches...
Hey everyone! Glad to finally have registered after lurking this forum for the past week. Here's my situation, and I hope I can provide enough...
Hi. I would like to thank you for the great information on here. It has helped me greatly. I have an Intex 20X52. I just upgraded to a Columbia 22"...
Hi...we've purchased and are installing our new pool. It is 16 x 32 x 52" deep. The pool is filling, however the long top rails are bowing...
Hi, New to the forum. I have read and read and read threads on the forum which have helped me tremendously. I have the area the pool will be set up...
I've been browsing around the Internet, trying to find out more about pool cartridge filters and flow rates. Came across a Unicel FAQ: ...
I bought an 15' x 48" intex metal frame pool, near the end of the season, one side of the pool started sinking through the tarp and into the ground. ...
Hi, New user here. I have a new setup 16x48 Ultra Intex / Saltwater in the box. I have a very sloped yard with lots of mature trees and extensive...
okay....trying out pool ownership, as advised, with intex metal frame (16x48).... it is on mostly level ground....it has a bit of fall to one...
I'm not exactly sure when I'm going to take down my pool, it depends on if the weather holds out or not. With these cooler nights and daytime temps...
We are new to owning a pool. We had a sailboat on the east coast of Canada and enjoyed it greatly when we actually sailed. It was very inconvenient...
Okay, this may be a silly question. Can we set up our Intex pool on top of the grass? Or do we need to clear the grass first? I think it's been...
This forum is a great source of information! I've already spent a number of hours reading, and have ordered the K-2006 test kit based on advice here....
Hello My name is Jenny. We own a 24' x 48" Pro Series Frame Pool and live in the state of Oregon. We have nice summers we average from 75 to 85. we...
Hello guys found this site and excited. Anyway just bought a 18 x 48 pool for my daughter's 8 birthday. Leveled the ground and is fill good...
A Google search brought me to this forum. I registered, and than found that the forum disappeared until I posted. So I will post, I was wondering...
Hi, I just wanted to know if I should plug the ionizer back in after use of the SWCG as to keep it dry. It has a cpl prongs that fit into the cap...
This is my first pool and it is not set up as yet. I purchased 1" chlorine tablets and a float dispenser for it but after some reading perhaps just...
Hello I'm a new owner of a 15x42 intex pool and just looking for info on set up and up keep. It has the filter that came with pool kit.
Hi, We have a summer escape pool (a cheap type of pool from our local store). We just converted the original filter to a Intex pool filter. Does...
This is the only place forum will allow me to post so mods feel free to move to appropriate area if necessary. Were due to start construction on...
Good evening. I just erected my Intex 15x48 metal frame pool. I placed the poles inside the restraining rope, as directed. However, while...
Last year we set up a 15'x36" intex pool and were very happy with it. But I always had a lingering fear about safety and am hesitant to put it up...
Greetings Ya'll! Hope everyone is having a great and safe summer so far. this is my second posting. We recently had to take down our above ground...
Hi new member here. Just put up the Intex ultraframe 12x24 and it's almost done filling. I'm seeing that it's not 100% level, but not too far...
Does anyone recommend any inexpensive pool vacuum that actually works that will cost less than my pool? I see there are many cheap vacuums out there...
I set up a bestway 14 x 48 pool and unfortunately filled it and put one back of ez shock in it. Now what? I apologize if I am posting a repeat, but I...
Hi folks, I'm a noob to both forum and pool ownership. We just purchased this pool...
I have a frame built out of 2x6 that is level across the top, but 5"deep on one end and slopes down to about 11 inches on the opposite (long) end on...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules