Forum: Above-Ground Pool Construction & Repair

Hi, I have recently completed building a shallow end and steps for an above ground pool (18' x 52' intex) It covers about a 1/3 of the pool and...

I am installing a new liner for the first time and was wondering if I cut the old liner at the base of the cove, leaving a circular portion of the...

Hello, Just bought an above ground pool. Now waiting for the permit from the town so we can have it installed. We have never had a pool before...

Hello Everyone. I am new to the forum and was wondering if anyone has replaced a variable depth liner in an 18 x 33 lomart pool by themselves. I am...

About an inch wide - considered using the patching that came the new floats we bought this year but thought I better come here and get advice before...

I am in the beginning stages of planning for an above ground oval pool which will be placed on a hill. The only question I have now is installing a...

The pool is almost up! Time to shop! I ordered the test kit (using link to give back to forum). What else do I need to have on hand for when...

Long time above ground pool owner, first time Kayak pool owner. The pool is up and running (32'x16'). The questions I have is how much deflection...

...and we don't have time to wait for their re-shipment. We have a birthday party planned next weekend and if the cove arrives Thursday, no time for...

Hello, I need to get a replacement liner for a 15 x 24 oval Esther Williams pool. I was in the process of looking into a new beaded liner and...

Hello all once again! Tuesday the wife and I purchased a 12x23 above ground pool by Atlantis believe the model is the inspiration. Also we purchased...

Hello! We just purchased a 24' x 52" above ground pool by aqua leader. Its still in the boxes and we are awaiting installation next week. We were...

Hey, my first post, here. We have a very small hole in our liner, about a 1/4 inch maybe, and have patched it with the little patches that are made...

Carl, some long while ago you mentioned something for under the steps in an AGP. Plumber's vinyl? Plumber's mat? Plumber's something . . . and I...

Hi.. I found this forum looking for information on Doughboy pools. Advertising says they're able to give me "an in-ground pool at an above ground...

Hello All, We are just getting started with an AG. The two big questions we have are steel vs. resin trade-offs. The sales staff seem to...

Came out to the pool this morning and found the pump pot empty. Looked in the pool and found it down 8", maybe more. Yikes!!!! We discovered four...

We are looking for ways to weigh down our above ground pool steps.

Have a 30ft above ground pool. Going on vaca, should I leave pump on? Should I leave the solar cover on? Any advice.

I posted my first question here last night waiting for moderator approval but it seems to have dissapeared?

Has any one done this? Seems like a good idea. The installer we will be using does it all of the time. The 3 pools I looked at that he has done had...

A friend gave me an Esther Williams 21' round, which I solo-disassembled year before last, and I'm finally about to set it up again. My aging brain...

I am in the market for an Above Ground Pool and have been looking for used ones. I found a 24' Freedom Pool from Rec Warehouse and am going to look...

Thinking about pulling the trigger on a evolution advantage evg 752 with simple salt wondering what I need to do to plan site very flat sandy soil...

I have ordered the pool! It should be here by Wed. of this week. SCARY but SO excited! So what did you use under your pool liner (over the sand...

Just trying to find info on how to use an expandable liner in an oval pool. I would like the entire pool floor to be abt. 6ft. Not sure how drop in...

I know I need 150lbs of sand. What kind of sand to you get for the filter? Where did you get yours? THANKS! Kim