Forum: Pool Equipment & Operations

Hello all, I have a question about the circuit board on my Aquaswitch panel. Two years ago I had a lightning strike that fried the circuit board...

I am considering upgrading from the EC-65 to the EC-75 because my pool is 20'x40', 10 feet deep and roughly 40,000 gallons and I see the EC-75 can...

Hi, I'm new here, found this site while researching an issue with my Fiberstar system. Looking for some advice if you have any optic or lens type...

Hi all! I have been reading information on pool filters / pumps, and now I have to ask.... I have an 18' AG pool with 52" walls. It has a 1.5 HP...

Has anyone installed a pool safety fence for an in-ground pool, something like childguard.com? I just bought a house and need a fence, I like the...

Had my new steps for about a week now they are "Main access easy entry" I got them with a light that has 3 color clip on lenses Red, Green and Blue,...

I have an inground 18x16 ft pool that developed a leak in the line from the main drain. This weekend I plugged the bottom drain and determined that...

We have a Baquapure sand filter and just replaced the entire lid/multiport valve assembly (with a new spider gasket) and changed the sand. Now when...

I just had Leslies install a new Hayward Filter. The pressure builds up after about 4 hours. Pool is clear and readings are good. I backwash and no...

working on pool tonight, turned on the pool light switch and the breaker immediately throws.... any suggestions as to what is causing this or what i...

Hi everybody! I've been thinking on switching from sand to cartridge because my filter is about 25 years old and about to die. I have a in ground...

I have a 12x24 inground pool w/ a deep end. It has one skimmer, a main drain and two returns (one of which is hooked to a fountain). Bought the...

I just installed a brand new Hayward heater, H400FDN, and I'm getting error code AO when I try to fire it up. This is explained as a problem with...

Hello I have an old RBI Galaxy Pool Heater. the model is a PH 250S I believe and I am having problems with it. it is a gas heater if I jump the TH-PP...

Hi, The fiber optic lighting system I have has crapped out. I have tried just about everything to fix it and it's out of warranty. Is there a...

Hello everyone. I have a weird problem. Both this year and last year I had to replace the entire lateral assembly in my sand filter because the...

Ok, I searched the forum hoping to find an answer but better yet to avoid an embarrassing question. No luck, so here goes. I have a waterway pump. I...

Hello all. I have a four year old Jacuzzi CE60 "Splash Pak" 1HP Cartridge Pump/Filter system. When opening up the pool yesterday (24' above...

Hi: Converted my Superpump 1hp to a 1hp 2 speed this spring... works great! My question is... why am I getting a bit of an air bubble in my pump...

Hello pool folks! My problem: Intermatic timer, T100 series, has stopped working. I tried to replace it with a digital timer, GE 15132, but this...

We've had our pool in operation for 5 years now. Everything; pump, filter amd valves work as they should, but ever since the pool was installed...

I bought an Intermatic T104P3 DPST 220v timer. The kind that shuts the heater off a few minutes before the pump. I'm not quite sure how to wire it...

We are in the process of installing a new liner in our pool. I was looking at some of the newer lights : Polaris D'Light 400 bucks Heyward...

Anyone ever had their stainless steel pool filter develop rust holes? I own an AMERICAN PRODUCTS TITAN DE POOL FILTER that is probably 20 years old....

If you have sand in the pool, and you can't figure out why there is air in the pump, check the spider gasket. I did everything you can think of to...

I have a Jandy Lite 2 nat gas heater that works when fireman's connection is jumped. When attempting to use remote the heater does not turn on. The...

Well, it's pool opening weekend in NE Ohio. We have a 24ft above ground. This spring we had a drain line(french drain) put in our backyard...

Looking at buying a nice poolside goal that mounts into the concrete..getting prices of 600bucks installed..anyone have any advice or recommendations...

Hi all, my pool is only 1 year old and started having this problem last year, it will run fine while operating normally, backwashing or vacuuming to...

Hi All, Ive been thinking about building some sort of solar heater for the last month or so, just kind of doing the math and thinking about ideas....