Forum: In-Ground Pool Construction and Repair

New to poolforum as I am having difficulties trying to find information on replacing the light bulb in my Fiberstar model 6008. The old bulb (10...

Hi all, just registered and am looking forward to learning about building a new pool!

I just moved in this house with a pool. This is my first encounter with a house with a pool/spa. There is another 'pond' that also has pump and other...

I'm putting in a new pool and I would like to locate the pump, filter, and heater in an existing building which is about 60 feet from one corner of...

Hi. I'm new to the forum and am planning to install my own inground pool with the help of some friends. I'm wondering which online pool sellers...

I am looking into an oval above ground pool. I would like to install it against (or as close to) my porch to prevent having to build decking on all 4...

I would like to know if it's possible to install Deck Jets or Mini Jets into the surrounding landscape of an existing pool. I installed the inground...

Hello everyone, I have done a few partial drains and refills to lower the CYA levels in my pool. The most I've drained is about 12 inches, but I've...

hello, i have a question regarding the liner and the pool filter...roughly at the end of march, my wife and i had a new liner put in our in-ground...

Hi, I just replaced the liner in my above ground pool for the first time. All went well until I went to clean it and noticed a strange bump on the...

Hey Guys, new member here. I'm considering purchasing a 20 x 40 Inground steel frame vinyl liner pool from a SeaBlue pool dealer. Anybody have...

Over the last 2 years our pool liner has continued to develop wrinkles .... lots of them !! I tried Botox... as it worked for my in laws.... but...

Hello , First post of many to come. I had my first pool company here today. I have lots of reading to do. Thanks,

Hi all! As you can see by the photo I have a junction box that houses a bunch of wiring. I am assuming that this is to facilitate the pool light...

We just resurfaced our gunite pool with Clorinated Rubber. The instructions say to wait 5-7 days before refilling but our painter says we don't have...

My 13 year old Hayward Filter Assy blew up (my fault) and now I have a new Pentair Clean and Clear CC150. I have never dealt with the union...

Hi, I have picked out the size and most of the options I am looking for in a pool. My big question is about a pool cage/screen enclosure. I am...

We recently replastered our pool and paid extra in order to have the pool polished. The process was impressive with five guys in rain suits using...

Hello, i have been reading many of the posts here and a lot of people seem to be in the same dilemma, needing someone to repair there pool problems...

One month ago I used what I had on hand which was white automotive spray paint. That paint is slowly bubbling off under the water line. Is there...

Hi all, This is my first post to this forum but I've been reading here a good bit and reading about pools on other sites too in an effort to...

Hello, I am seeing small blisters about the size of a quarter on the steps of my pool. You can push down on the plaster and small bubbles will...

Just installed a new Haywood pump to out AG pool. It seems to be sucking air. A whirlpool appears by the return and I see air bubbles in it from time...

Hi All I am building a new house and a pool right after closing, I would like to hear any good tips that I should think off before starting this...

hi, last year we purchased a home with an inground gunite pool and now we have yellow spotting that is rough to the touch... can someone tell me...

Just installed (my husband and I) our AG, had watr truck here, now skimmer is leaking from the bottom. Must we drain to the skimmer to fix? We know...

I have a Hayward Variflo Valve and noticed last night that when I ran the filter, water was leaking out of my backwash line. I then saw that the...