Issues w/ stains, from iron, copper, & other metals & with copper-based products: Nature2, Vision, Frog, Ionizers, skimmer pills, Pristine Blue, Chlor-Free & . . . ?
___________________________________________ 10 Basic Facts about Pool Stains ___________________________________________ 1. Most pool stains...
____________________________________________ 10 Basic Facts about Pool Stains Stain removal with ascorbic acid Bucket test for the presence...
This was posted by PoolDoc in another thread this morning. It is concise and simple. A more thorough guide for dealing with metals in a pool is in...
Have used BBB method for years but have been fighting a metal stain on my white fiberglass steps and even liner for years . Readings are FC- 3.6, PH...
The pool is beautiful. No stains or signs of metal, though what I've read says that maybe copper is present in the water. I don't know how to test...
All of a sudden I am having issues with black / brown stains on the bottom of my pool. It is an in ground Marcite pool with a salt chlorinator. At...
I was filling my pool with city water. My son put well water in to do it faster. I went to shut water last night and of course only shut the city...
Helping son close his pool which is inground vinyl liner for first time. Pool is Salt System , 27000 gals, DE filter with a heater . Readings PH 7.5 ...
Last week in Pa the leaves are falling and temps are dropping so activity is less as swimming is about over . Open today for 1st time is 4 days and...
Had some work done on a chimney near the inground pool where they were grinding mortar joints and scrubbing with steel wool . Today noticed metal...
Can leaves stain a vinyl liner? We always open to leaves in the pool since we have so many trees. However this year I can’t get a light lime...
Can I use muriatic acid for high alkalinity with the permasalt system?
I know the forum this is supposed to be in, but for some reason I can't get access to it. I am a new user and I can't even search. Sorry.. I am...
Hi All, New to the forum. Tried searching but looks like I need to make a post first. We put in a new 27' above ground this spring, the same...
Hi! This is my first post here. I’ve gotten a lot of great tips that have helped us in our transition to taking care of our pool ourselves. We...
I am contemplating a water change to reduce excessive CYA levels and also remove iron stains from the sides of my fiberglass pool. I've read the...
PoolDoc note: I'm extending the information originally in this thread, to create a general Permasalt FAQ. ...
Just purchased a newer home, with a pool. Pool is 40k gallons, SWCG, vinyl, and so on. Like most pool noobs, I was OCD about perfect pool chemistry...
Greetings from South Texas! Had a fiberglass pool installed less than a year ago and I am very happy with the results. Water chemistry is on...
I have a mystery that needs solving. One of my three pool steps (the middle one) is a tannish color, while the other two are the normal white. There...
It's been many years since I've needed to post...due solely to the sage advice of those in this forum. Thank you for giving me the knowledge that has...
Yes I was Pool Stored Talked into trying ristine Blue as part of the install of a new liner after 30 years of exerience .Thie liner has been in a...
Hello, I had my pool re-plastered last spring with krystal krete product. All went great and looks terrific. All last summer I was fighting PH, as...
TODAY'S NUMBERS: FC 2.0 cc .5 PH 7 ALK 60 CYA 80 Hi, and thank you in advance! The water is not green, but it is very cloudy and I cannot...
I will try to keep this short: 1. I use BBB method, ten years no problem. 2. My gas heater deteriorated and stained my pool. 3. replaced my...
New liner in 22000 in ground pool. Filled with well water. Now green-brown. Would like ti REMOVE iron if possible. No other water source available.
They both seems to be the same.. but not sure which one is better in Amazon.com. Pool is all balanced but brown stains. Use the step stuff works well...
There is Magenta stuff, Purple stuff, Pink stuff and blue.. etc. For copper at 0.2 and mostly everything else is fine with salt at 3400. What would...
Do I use an ascorbic solution as mentioned in here or use a Jack Magic Magenta type of solution and add metal free for a few days.There is a 1.5 ppm...
Seems like Copper is at 0.2. 22,000 gallons, Sand filter. Tested today.. TA 80 PH 7.2 T-Hardness 150 TC 1 TA 140 CYA 20-30
can CuLator be used a saltwater pool. Just had my water checked and the copper level was 0.8 and the iron level was 0.4 If CuLator can't be used...
I have a 10K fiberglass pool that has iron stains. Although Ascorbic acid works great it makes it difficult to manage the chlorine levels (even with...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules