Forum: Salt Generators (SWCG) & other Chlorine Feeders

With goggles on underwater and your chemicals are "suppose" to be correct should the water be some what cloudy cause of the salt? Or should it be as...

...lose my registration :) Wife bought an AG INTEX pool, 10' x 30" for the kids. Aside from your standard blow-up pools for toddlers, this is our...

We are currently looking at buying an above ground pool. We would love to do inground, but the cost is what's stopping us. That being said, what is...

We have a 22,000 gallon pool that was maintained as a salt pool by a Del product that is no longer manufactured. When it bit the dust, we tried to...

Hi there My Salt Pool Chlorinator - Aquarite Turbo Cell was inspected a week ago and was working perfectly. Today I noticed the pool water was...

I have an intex 12x24 above ground pool. Well water, salt water system with a sand filter. My problem is I can't get a chlorine reading. All other...

I don't want to spend more than $800, my pool is 28,000 gal and I have a Jandy which I've already replaced once. Any suggestions? I've researched...

I have an Intex swg with the copper disconnected and has done great for the past two seasons, this year cl output seems low. Is my assumption...

My Intex saltwater system will cut on everyday at the same time and the max it will run is 12hrs. I know that sunshine will deplete the chlorine in...

I have a 7 year old Aqua Rite system with a T-CELL-15. I noticed this year that the salt level reading on the panel wasn't going up as high as...

I have a 5000 gallon Intex above ground pool. Iam using (new) Aqua Chem salt strips. My reading is a 6.6 on the strip which tells me I have 3070...

My new Chlorease salt water chlorinator is reading 4.1. Since a reading below 4 is low and calling for salt, can anyone tell me how much I need to...

Greetings from Fort Worth. My mothers salt cell has given up the ghost. Should I replace it for $700, or just get used to the BBB system? Thanks. ...

I bought a house this past fall with an indoor pool that hasn't been used in a few years. It's 32' long and 16' wide and about 4' deep in the...

So I sold My boat :-( and putting in an AG pool for the family. Well for my wife, haha. I have shopped around and yesterday was told about this...

Hi there, I have an intex ultra frame 22"x 52" round pool and a Krystal clear sand filter pump 14" & saltwater system( model cs 15110). The pool has...

Now that my Pool Pilot Digital SWCG by Autopilot has been running for well over a month I can give a hearty and happy review of it. It works...

--------------------------------------------------------------------------------------------- UPDATE: Don Uhle, owner of Circupools, contacted me...

I have a Polaris Autoclear Plus that continuely shows low salt. I have cleaned it per mfg directions and it starts off good, with all lights. After...

Here are my readings with BOOST on. Software: 4.2 Cell: SC-36 Power Level: 2 Salt: 3700 Temp: 77 11V 2.7 A I live in NC. I have replaced...

How do I calibrate an Autopilot Soft Touch SWG?

My motherboard on my bio spring computer shows a display but no lights are on ! I added salt last night and nothing has changed except the...

Hayward Swim Pure + No Flow Light Flashing vs. Solid I have a Hayward Swim Pure + and when I turn it on (using the breaker) the following occurs:...

The other day I started my Aqua Rite SWCG (T-15 cell). The low salt light started flashing (the panel was reading 2600 ppm). I checked the level...

I have a Swim Pure Water system and it is giving me very low salt readings. (It started out at 3100 and now is at 1200) As a result, I added way too...

Check system red light flashes and message saying check/Clean Cell on power level 1&2. putting the system on power level 3 the message changed to Low...

Due to the high cost of salt cells for my Aqua Rite (T-15 cell) SWCG, I'm always looking for ways to maximize the cell's lifespan. I keep my CYA...

My didgital readout is blank most of the time. Its not properly reading the salt when the display does work and the check salt light stays lit. I...