Forum: Salt Generators (SWCG) & other Chlorine Feeders

My pool builder is strongly recommending bromine + uv for a pool. Is that a good setup or should I go with SWCG?

Hi All, I realize it's an age old debate….but I'm losing sleep over what to do. I am putting in a rectangular gunite, blue stone coping 13x38 with...

We are putting a pool in our house in Texas soon. Several of the pool contractors are adamant that we shouldn't use salt and prefer Nature 2 or...

Has anybody had issues trying to unscrew the Haywood Chlorinator cap/top? I have tried, my 300lb son has tried, I even tapped the top with a hammer...

First time pool owner via a new home purchase. Studying about SWCG. Should I use or not. I really like the idea of testing and managing my pool as...

How much can I expect to pay, switching over to salt? Thx

Im a new Pool owner. We bought a house with a '27 above ground pool. We know nothing about it though. I tried cleaning it to get it ready to close...

First of all I should mention, I haven't been to this forum in a year or so. Reason is that with all the help I got from here, I didn't need to :-)...

We are about 6 weeks from having a liner pool built ( 24 x 40 w/ auto cover). We have been researching the best type of chlorination systems. There...

Aquapure 1400 stopped linking to Aqualink RS8 The system has been running fine for years, all of the sudden the Aquapure stops making chlorine. ...

Just trying to understand the SWCG before I decide to invest. The flow sensor seems to be an electronic type. Is it basically a thermal mass flow...

I am considering converting to a variable speed pump. The vendor says I will save a lot of money my electric bill. They want to program the pump...

I have an autoclear plus that is giving an error code of 94. Checked cell and it is clean, salt level is good although not reading correctly. Pool...

My Mineral Springs system continues to show "no flow". We balanced the water & got it right, then added the salt. Still shows "no flow" & I am...

I have a tremendous amount of white deposit on my tiles and suspect it is caused by the Salt water chlorine device as it produces enough calcium...

We have a bioguard Mineral Springs unit and the no flow light stays off even when pump turning on (which is usually when light blinks for a few...

I had a pentair intellichlor ic40 installed last summer. The cell light is off and will not come on, even with the output at 100%. The salt level...

My Pool Pilot is giving me the warning check/clean cell. I added 50 lbs of salt (now at 3300ppm), my power level is at 2, cell=17v 3.9a, software...

http://www.saltpoolguys.com/autopilot-pool-pilot-ag/ When I was researching these. Any type of review was scarce. Even the salesman did not have...

After 2 summers where I was away for 2 or 3 weeks, and knowing I'd be away at least 6 weeks (2 in May, 4 in July), I decided that a salt-water...

I thought I post my experience with keeping pH stable when using a SWCG. I use to follow the recommedation on my Taylor test kit and kept TA at...

I have a Mineral Springs MS 10 salt generator that is flashing high cell, i replaced the cell with a Turbo Cell a couple years back and everything...

I have a Jandy Aqualink RS (Purelink) with A Jandy 1400 Salt Cell. I was having the dreaded "no flow" (sometimes no service code lights and other...

I saw this today at Walmart kit and it made me curious because people had been talking about these costing close to $1000. I wondered if anyone had...

I noticed that the Power LED is not lit (neither red nor green) on the IC40. I acid washed the IC40 as it was very dirty and completely plugged...

Wanted to pass this on to a forum that has helped me so much. My AG aquarite SWG was working fine for 5+ years, then started blowing fuses. After...

Hi Pool Doc, The salt water questions are what I'm looking for. Maybe you can help. I have read allot of saltwater systems. And like anything...

Getting error code 170. Any suggestions?

Hello all, long time pool owner first time forum member. I have had a pool pretty much every where I have lived here in Florida, from a Intex above...

With goggles on underwater and your chemicals are "suppose" to be correct should the water be some what cloudy cause of the salt? Or should it be as...