Trichlor feeders, salt-based generators and systems, feed pumps, and more.
________________________________ FAQs & Guides: Salt Water Pool Systems (SWCG) & other Cl feeders ________________________________ Salt...
______________________________________ SWCG (Salt Water Chlorine Generators) - Pro & Con Even though 30+ years in the pool business has taught...
Hello my name is Gabriel Alfonso. I have a ground pool of 38 thousand gallons and I have the aqua rite salt chorination system. I have put salt on...
I'm looking at replacing my QuikChlor system with an Aqua Rite. My pool is apprx 12,800 gals---should I go with the 15k or 25k system? Would going...
I am wondering if anybody has electrically connected a Aqua-Rite SWCG to a Hayward Ecostar. The Ecostar has its own built in timer, is there any...
Just last week I noticed that the display readout on my generator is not displaying any salinity levels. It shows all the other readings.. just not...
I have a Goldline SWG and the main board (part number 066012C-1 Rev C) had a bad component on it. It is the large black round resistor? marked SA...
I apologize-I am traveling and don't remember the exact model, but it's the Aqua Rite for 40 K gallons that has controls for lights, pumps, many aux,...
Can anyone tell me the specific differences between the "regular" and the JR model? I found one on eBay from a reputable seller and this is what...
My Aqua-Rite cell voltage is a little high when generating, it is reading 26.6 while the manual says that the typical voltage is 22.0 to 25.0 volts. ...
Current Status: Aqua-Rite Turbo Cell 14 (year three), 30,000 gal SWP, Water Temp high 90's, Salt 2940+/- ppm per AquaCheck strips, Pool store...
I have a Jandy Aqualink RS (Purelink) with A Jandy 1400 Salt Cell. I was having the dreaded "no flow" (sometimes no service code lights and other...
My T cell 15 went out after 7 years of service. Bought a new one, put it into the system, first day everything was working. Generating chlorine, the...
I'm brand new here so please bear with me. Our Aqualink RS6 completely died this morning. The inside control panel and the outside panel will not...
Hi everyone...has anyone had a problem with the PS 4 Aualogic motherboards?. Just had mine replaced to the tune of 500.00 bucks. My wife says I...
Hey guys, thanks for taking the time to read this. I am in the process of moving to a SWG. I also have a solar system and heat pump. I was looking...
One of the components on my PCB is burnt out, and I'm no longer under warranty. I'm hoping I can replace the part ... problem is I can't identify...
Noticed some green algae on my pool walls last week - checked my control panel which said check cell, and the reading said 0 amps and 0 volts. Cell...
My Aquapure 1400 (4th summer) has service codes 172,181. Cleaned sensors with scrubbie pad and tested board with 1 number different than what they...
I have an AquaPure Apure 1400 that is giving a 170 error message. Does anyone know how to trouble shoot the circuit board?
I have a four year old Jandy AquaPure 1400. This year I've been getting service lights and error codes referring to low voltage. I've swapped out...
I am using an Aquapure 1400 system in my 12,000 gallon plaster pool. I seem to have a significant amount of build-up, (calcium??) in the salt cell....
Aquapure 1400 stopped linking to Aqualink RS8 The system has been running fine for years, all of the sudden the Aquapure stops making chlorine. ...
Hi! I posted a similar question a few days ago, but I think it was in the wrong forum. I'm trying to figure out exactly which items I need to...
I have the Jandy Aquapure 1400 and aside from the circuit board recall, it's been trouble free. Today I'm getting a service code of 172 which is the...
My pool company (which I no longer have) let the salt get to low. I noticed the service light on the aquapure and added salt, cleaned both cells...
Hello, all. I'm on my third season with my Aquarite system with no complaints up to now. The "no flow" LED will not go out. It has usually blinked...
Hello, We opened our pool ~ 1wk ago and have been trying the balance the chemicals ever since. Yesterday we got the water tested and everything was...
Hi everyone . . . newly installed aquarite unit on a 18k new gunite/quartz pool, filled a week ago. My chlorine levels don't seem to want to go...
does anyone know if the aquarite swg will work with the jandy power center and aqualink rs?
I opened my pool on Sunday, and had it clear in a few hours... a little CYA, calcium, muratic acid and baking soda later, and I am all my numbers are...
Hello, I'm a first time pool owner and am having a Oval 21'x43' AG pool installed on March 28th. I've purchased a Aquarite salt chlorinator and am...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules