Forum: Salt Generators (SWCG) & other Chlorine Feeders

I have a SWG and had my pool filled with my city tap water last year. Since then I have had a water softener installed in my house, and the line that...

I was looking in to the Goldline/Hayward Aquatrol. Or, possibly a Chorease. Does anyone currently have one of these. Opinions please!

Is this normal? I added about 8 bags to a 20k pool, that's when the add salt light went off.

Has anyone ever tried over 100 ppm of chlorine in their plaster pool? What would be the negative effects? The reason for asking this question...

Our pool was finished almost a year ago sort of anyway.... I have no idea how much salt they used when they installed the Pool Pilot but found...

I'm in South Florida and a new pool .... I read that its better to use shock instead of SWG since its better for the cell... questions... ...

A new pool guy opened my pool yesterday and my pool pilot reads check flow and blinks red. I'm wondering what the most likely cause is. My filter's...

Hi, thanks for reading. We have an Aquarite control panel. It had been showing salt at 3000 ppm up to a couple days ago when I put it into...

OK, you all have gotten me to thinking about bleach: sounds simple, sounds cool. If I figure right, my 18500 gal IG pool will need about 12 oz....

I've been reading about this unit on the autopilot website. The website states that the unit is "*Not Yet Available to Order On-Line". I was...

Hope I'm not being rude but has anyone purchased a Pilot SWG off of e-bay? I saw some pretty low prices. If not e-bay any other suggestions? ...

I have just installed a 24' 54" AGP. OF course I didn't find this fourm untill after I bought it :( . I got a hayward cartridge filter and 1.5 HP...

I'm so glad I found this place!!! My pool is three years old. I believe it is 27,000 gallons - vinyl. Aquarite generator. Pump runs 12 hrs a day!...

Thanks to everyone who helped me determine the suitability of a SWG for my current pool equipment set-up! I now am faced with the dilemma of which...

Quick question, do I need to turn off my SWG when I add any chemicals? i.e. stabilizer, alk. increaser, or even salt? My SWG is hooked into my pump...

Hello everyone... first time here. I have been looking into salt chlorinators but have been getting conflicting info regarding equipment...

http://www.poolforum.com/pf2/showthread.php?t=688 Thats problem #1 Problem number 2 is that my salt readings are 4500. Thats what the unit is...

Anyone have any suggestions on a good home-use salt level tester. I have seen the hand held models at pool stores but don't know who makes them or...

I ran across a chlorine generator made by Zodiac (DuoClear). No I don't work for them!! It uses a technology which delivers controlled trace amounts...

Wow... I filled my 26,400gal pool and before I put the salt in I set the salt calibration to 3000PPM on my Autopilot SC-48... thinking this was the...

Has anyone purchased salt from Lowes? If so, what did you buy? I am converting over to salt and my local pool store is very expensive.

I have a Chlormatic lll SWG, Jandy bought the company and it is now marketed as the Aquapure 1400. I'm updating some of the components with the...

I have a Jandy Aquapure 1400 in a three month old plaster pool. Its about 26000 gallons. PH 7.8 CYA 100 Alk 80 Salt level 3.0 Chlorine 2.5, for...

Doing a replaster on the pool and will convert to a SWG at the same time. 21K gallon pool. About how much salt will I need to add in the beggining? ...

I was reading the AutoPilot manual online(don't have the unit yet) and it says to shock using the unit itself or using potassium monopersulfate(a...

Is the Autopilot considered an outdoor or indoor unit? The installation instructions say to practically avoid water. In South Florida I don't see how...

I opened my pool on Sunday, and had it clear in a few hours... a little CYA, calcium, muratic acid and baking soda later, and I am all my numbers are...

In the last week our pool temps have jumped way up and now my chemistry's all out of whack. First of all, my stabilizer is high...is there anything I...

Does anyone know where I can get schematics for my SWG system ? I have a "Pure&Clear" SWG system from Clear-Tech Automation, who are out of...

I am really considering converting to Salt. I have read several positive things here but am curious about the negatives. What are the negatives...