Forum: Salt Generators (SWCG) & other Chlorine Feeders

Hi, I have a 2007 gas heated 16x32 vinyl inground pool that runs on a Hayward ProGrid DE filter and Super Pump. I use Sustain chemicals and have...

Hi Experts, I would really like to convert to a saltwater pool. Would appreciate any advice or recommendations you have for a good system. My pool...

I believe my cell is dead. End of season last year, plenty of salt, but zero chlorine. All else seems fine. They dont make this model anymore. Can...

My wife and I were looking into an new inground pool 16*32 with an 8 foot deep end. They offered a chlorine generator for an additional $1300. This...

Hi All! We have a 11 year old, white plaster, in-ground pool. Anthony and Sylvan did not offer Salt Water Generation in our area when we built...

Happy Spring everybody, I am a happy pool owner in SC with a 20,000 gal round AG pool. I started using the BBB method last year after a friend told...

I just installed a Salt Generator and a new Intelliflow pump with 4 speeds. I'd like to be able to run my pump at the two lowest speeds but there...

I am getting two alarm codes from my CM601. I can't seem to find what they are. one is 172 and the other is 186. I know the the unit is not making...

i ran this idea by poolsean with autopilot last night re: season startup and shutdown at end of season for that matter. while it was specifically re:...

New plaster IG pool here. Just got my kit yesterday and everythin glooks pretty good - FC - 3.0 CC - 0.0 TC - 3.0 PH = 7.7 (less than 7.8 but...

Good evening. Ive been reading here for 3 years and learned a ton. We put a pool in 3 yrs ago and I really have had no issues...thanks to this site I...

Hey all, I was just told a couple of hours ago that I'm going to the Goldline SWCG 'pool-pro' seminar tomorrow AM @ 8 EST. Any ?s that I should...

Hi Guys, I've been trying to do my homework prior to buying a salt chlorinator. I found some pretty inexpensive ones on Ebay for under $500.00....

I have the IntelliChlor IC40 on a 20,000gal gunite pool. Lately the "add salt" has been staying on. Per the manual, the add salt light comes on when...

I have the link and downloaded the PDF manual. I thought I should not link unless asked. Its made to be attached to the top rail of an AG pool. No...

We have a 22,000 gallon pool that was maintained as a salt pool by a Del product that is no longer manufactured. When it bit the dust, we tried to...

I see in my AutoPilot manual they recommend use of Lo-Chlor Salt Cell Protector Plus to aid is scale removal. Does anyone use this and does it...

I estimate my pool size at 45 - 47,000 gallons. Looks like the largest residential AutoPilot - the SC60 is rated for 50K gallons. My question is;...

I have an Aqua Clear by Polaris. The low salt indicator is on and the cell will not stay on. Salt is at 3600ppm, which is in range. I cleaned the...

I have a GoldLine (AQL-PS-8), that all of a sudden is not responding to any key press either on the inside the house wired controller or at the main...

Had a power outage that caused problems with our Aqua Logic PS8. After fixing "Chlorinator Off - No Cell Power" error (required re-soldering a relay...

Today I woke up to my Jandy PDA telling me to "Check Aqua pure", "General Fault", and my salt level reading is about 500 PPM lower than it was...

I have a Aqua Rite chlorine generator that I installed about 4 years ago. I checked yesterday and I have no lights at all, no digital display. When...

My new Aqua-Rite is not producing chlorine. I noted on the diagnostic that the amperage reading was running about 3.21 to 3.45 which is lower than...

Been having issues with our Aqua Rite unit, the issue is reading accurite salt levels, cleaned the cell, scoured the Goldline website for info...

Greetings... My pool is about 25,000 gallons. We bought the house about 1-1/2 years ago. Pool has the Aqua Rite system. I have been pretty...

I have the aqua rite with the 40000 gallon cell. My pool is 24000 gallons. ======================================= I added my info to the...

Hi, i just had my turbo cell tested at my local pool store and it passed so the cell is in working order. Whe i turn the SWG on, the green power...

OK, so my motherboard was fried (2 very black spots burned thru). It is an old system, and the motherboard changed in 10/04 I think. The fuse is...