Forum: Salt Generators (SWCG) & other Chlorine Feeders

I operate our neighborhood pool and would love to change to a swg. It is 45,000gal IG. with a kiddie pool on same filtering system. We average...

Hi guys- first time here. Wow, looking over this forum, I would say salt is here to stay! I'm still in the stone age. Hayward CL200- anybody...

Hi all - we have an AquaLogic PS-8 with TurboCell. This is a brand new system, but it seems to be consistently reading a salt level that is 400-600...

Had my plumber swing by today to do a start-up on my SWG. he didnt even call me, So I figured well he didnt even come. When I got home I noticed...

Hello all. Having our first pool built in December, 16 x 30 in-ground gunnite (Master Pools). After much research I decided to go SW chlorination...

I noticed my screw that holds in the pool light was almost disinegrated. The light floated up and all the threads on the screw were gone. I used a...

I have an Ikeric high efficiency pool pump and so my system is setup to operate at very low pressures most of the time for maximum energy efficiency....

I find that I need to add more salt to my pool. I thought the salt was only lost by splash out or refiiling. But my salt level has appearently...

Hi Sean, The autopilot DG-220 - 48 cell was installed with our new pool in September 2004. Earlier this month the unit stopped coming on for the...

I have a spill over spa attached to my pool (3 weeks old). I hadn't really thought about the plumping configuration until yesterday when I went to...

I have the AquaRite Goldline SWG. What is the maintenance for it? I have taken the fuel cell offline - and hosed it out - but am unable to remove...

I'm looking at converting over to a swg and leaning towards the Autopilot. My questions involve if it is the right choice for my configuration. Pool...

We are in the process of having our pool built and the plumbers have come and installed all of the plumbing and equipment. This is the first time...

We are in the process of ordering our pool and are wondering which SAlt Generator is the best for our climate and our usage. We are in Yuma Arizona...

Hi Waterbear, the other day you mentioned that you have to calibrate your SWG meter with the drop test. How do you calibrate it? I think I have...

Our home warranty (Allied) sent a pool co. over to check our equipment. The guy opened up our Nautilus N-48 filter, pronounced the manifold cracked...

We are currently in the process of filling our new pool (We finally did get the pool up, but that is another story) We have an AG 41x21x52" oval...

Here are my first clear water test results: (Leslie's did them.) FC: 0 TAC: 0 pH: 7.6 TA: 90

I just did a partial drain and refill to remove excess CYA. And that little venture was successful - we are now at a happy level of 60. Anyway,...

I have an AutoPilot Cubby that is eating through cells like a teenage boy on steroids. I maintain it weekly by shooting the garden hose across the 5...

Problems with my AquaRite SWCG within an hour after start-up. I may need to call GoldLine but have to wait until Monday. In the meantime, if anyone...

In another forum, I was reading how to get yellow stains off the return jets. It sounds as if the stains might have been caused by contaminated salt...

My wife and I were looking into an new inground pool 16*32 with an 8 foot deep end. They offered a chlorine generator for an additional $1300. This...

Hi everyone, I am a newbie pool owner here in Canada, and just had the IC20 installed... its an all Pentair system Filter/Pump/Heater/Lights etc. My...

I have a 220 V 30 A "ground protected" electricity supply to my pool equipment and I want to add a SWG. My local pool shop says I need a special...

Hi, I've been searching the site for info about SWG cause I was thinking about about switching from baquacil but I'm still unsure what the SWG will...

We installed our new SWG a few weeks ago. We love it, but tonight I noticed that the jet covers are turning quite yellow. The pool is 3 years old...