Forum: Salt Generators (SWCG) & other Chlorine Feeders

Greetings, I also posted this in another thread, but figured it belonged here. I have a new salt water pool, approx 27,500 gallons, in-ground,...

I have a Raypack heater and would like to install an AutoPilot SWG. As seen in the picture below the Inflow and Out flow seem to be to narrow or...

What tool do you guys use to easily remove the salt cell? I tried the other day to twist open the connectors between the salt cell and the pipe and...

does anyone know if the aquarite swg will work with the jandy power center and aqualink rs?

I am reading the manual for the heater my PB is going to install. Its the Pentair MasterTemp 400. On page 3 of the manual it states: ...

Hello PoolForum-ites, Looking for feedback from salt pool owners to the following questions: What type of pool finish do you have? Vinyl...

Hi Guys, I've been trying to do my homework prior to buying a salt chlorinator. I found some pretty inexpensive ones on Ebay for under $500.00....

3 year old 18,000 gallon gunite/plaster pool with aquarite generator. I have a leuters limestone coping that is crumbling away, breaking down with...

My Taylor salt kit says my salt level is 3400ppm. I tested it 3 times over the weekend and always come up with 3400ppm. I added the salt Friday and...

Oh boy, I might have missed the point. Is Calcium Hardness important in indoor liner pool with heater ? I have not raised CH "probably 40-50 in...

Pool Pilot is installed and pump is running. All seems ok. I will not be adding salt until next week and do not have the cell powered. Can I attach...

Hi My Pool Pilot display went blank and the unit has shutoff.I have checked the fuses (all ok)and the unit has AC power to it.The fan is...

I just recieved my PoolPilot Digital. It dosen't say anything about mounting outside. Can it be mounted to an outside wall or does it need to be...

I have a Zodiac Clearwater LM2 SWG that I have had for about 2.5 years now. Tonight, for the first time, I noticed that when the cell is...

Well the contractor who did our pool start up finally showed today to add in the salt and start our SWCG this morning. The water was a nice clear...

Hello, the pool builder put in salt a week or so ago. I took a water sample to the local leslie's and was told that my salt level is 5100 and...

I am finally getting my pool. The temps here in Oklahoma are ranging from 50-70 in the day down to 30-40 at night. The PB will get the water balanced...

I have this system and recently had to drain and re-fill my pool. I'm on a well. The acid reading on the menu is 8.57 and according to the...

Hi, Can someone tell me the type of Salt I need for a salt water generator and how much I need? I have a pool at is approximately 20,000-25,000...

Any recomendations for a salt test kit? I have a Taylor K-2006 but need salt. Are any better than others? I wanted to order one of Ben's PS234 with...

When I use the Intellitouch to view the "water salt level" it always says 0ppm. I know it is at 3400 though. The pool guy said it would take a few...

Not sure if this is appropriate to post here or not, but moderators, censor as you see fit. I've got a Clormatic III power unit that is functional...

Does anyone have any info on the QuickChlor SWC system? Shasta Pools here in the Phoenix area installs these and am trying to find some information...

We are keeping our pool open this winter here in Georgia. We have an Aqua Rite system. It is currently reading at 3300 and the water temp is reading...

We are looking at renovating an otter pool at our local zoo and I was wondering if anyone had experience with SWG's in otter pools. If anyone has any...

We have a 2 month old 12,000 gallon vinyl pool. We have an Aqua Rite SWG and its been great. Our pool has been crystal clear all summer. However, we...

Well the cooler weather is here and my pool temp is around 59 degrees. My SWG Pentair IC20 has turned itself off (under 59) to protect the cells from...

I'm in my final planning stages of an IG pool. Does anyone have any experience with the DELZONE TrioPure combination SWG /ozone generator?...

My Ecomatic manual recommends monthly cleaning of the cell with a muratic acid solution. I've been running the system for 2 months now and each time...