Forum: Salt Generators (SWCG) & other Chlorine Feeders

I recently replaced my T Cell 15 with a new one - also, recently repaired the Board on my PS-4 (fixed the "no cell power" error message, thanks to...

One of the components on my PCB is burnt out, and I'm no longer under warranty. I'm hoping I can replace the part ... problem is I can't identify...

Just fixed my board, The veristor at the top right hand side of the board was burned out. Digi Key has them at a cost of around $2.59 each. Make sure...

I've got a goldline/aquarite chlorinator that was working fine until recently the flow sensor seems to have failed. I've checked it out, appears...

I have had a pool pilot digital for six years. I replaced my first cell about three years ago. This spring I keep intermittently getting a "warning...

Well the water has turned too cold even for the Grand kids to swim (Yes even in Arizona), so I thought I'd give a short recap on my first summer with...

Hi, all -- Just converted to a SWCG pool this summer when we replaced our vinyl liner. I've been working on the water balance to try to allow the...

I ordered a replacement cell for my Ecomatic SWCG from Pool Supply World back in June of this year. Over the weekend the flange that screws the cell...

I have a PoolPilot DIG 220 that seems to be working ok. The SC 36 cell was replaced last year. However, this PoolPilot emits strong radio...

I have a 22000 gal IG vinyl pool with a SWG. We just installed the SWG this spring and for the most part it's been great. But lately I am having...

5 year old Jandy Aqua Pure 700 system. Stopped making chlorine a couple weeks ago. I found the troubleshooting manual online and went through it....

My T cell 15 went out after 7 years of service. Bought a new one, put it into the system, first day everything was working. Generating chlorine, the...

I have a GoldLine (AQL-PS-8), that all of a sudden is not responding to any key press either on the inside the house wired controller or at the main...

Here is a problem for you experts out there. I have one of the older version Pentair Intellichlor IC40 (v1) units installed back in 2006. This...

Current Status: Aqua-Rite Turbo Cell 14 (year three), 30,000 gal SWP, Water Temp high 90's, Salt 2940+/- ppm per AquaCheck strips, Pool store...

I recently purchased a house with a 3 year old inground pool and a salt system. The control panel from the salt system had to be replaced (black...

Anyone know where I can get a Aqua Rite replacement T15 cell for less than the $980 that my local pool store wants? According to Hayward tech...

Hello, All ~ Thanks to everyone who has posted answers to my questions in the Chlorine and water chemistry forum. We are new pool owners of a...

My salt chlorinator is a cm601 from clormatic who was bought by Jandy who was bought by Zodiac. It is about 7 years old, and I replaced the cell...

I just installed an Intex 6453gal above ground pool with an SWG. It came with all the lousy test strips. I know I need a good drop test kit but am...

I have a Bluehaven branded Goldline salt system, bought a compucell generic cell for it, worked fine till about 3 months ago(temp sensor went in the...

I know you they can look at readings on the Aquarite controls to determine if the cell needs to be replaced, does anyone know what to look for? ...

Has anyone with a PoolPilot had the screw projections disintegrate, causing the electronic panel to fall away making it impossible to use the panel...

Been having issues with our Aqua Rite unit, the issue is reading accurite salt levels, cleaned the cell, scoured the Goldline website for info...

Hi all, this is my very first post to the forum so a big thanks up-front for all the help. I'm a new pool owner and haven't much clue about what I'm...

Poolsean: I will direct this question to you but wanted to post it in the forum in case someone else comes along with the same or related question....

Live in Mn and we have a fair amount of rain, I am having problems keeping my salt levels up to where they should be. It seems worse this year than...

I just finished refilling my pool. I have a SWG, should I test my levels before or after adding salt? And if the chemistry is off should I adjust...

Hi, I am tired of paying $10-$13 a bag for salt, Sam's has it for $3.39 a bag for Morton table salt. I would think this is ok salt is salt but I want...