Trichlor feeders, salt-based generators and systems, feed pumps, and more.
______________________________________ SWCG (Salt Water Chlorine Generators) - Pro & Con Even though 30+ years in the pool business has taught...
________________________________ FAQs & Guides: Salt Water Pool Systems (SWCG) & other Cl feeders ________________________________ Salt...
Looking for advice on what salt chlorine generator to get for an above ground pool. It is a new pool, about 17,000 gallons. I already have the salt...
Okay I have tried searching the forum for the answer, but I am currently deployed to Afganistan and my internet is sketchy and slow at best, so...
My sister gave me (yes gave) her 17x31 foot Tuff Pool, we have it set up and have been in it almost daily since Memorial Day. I have owned pools in...
My chlorinator is literally falling apart. I purchased a replacement tube but cannot get it to stay on properly. How do I get the tube over the lip...
I have a Hayward Chlorine Feeder that appears to have a very small crack in the top of the screw-on cap. It may also have a bad gasket. Is this...
I have owned an above ground 18' pool now for 5 years. I have loved it. I make sure I ad PH Down VERY regularly and a stabalizer and I am all good...
Starting to mull over the idea of the Hayward sense and dispense kit...
Just had a poster ask about the new (mid summer 2010, apparently) SWCG, which combines an SWCG with a copper generator. I spent some time this...
I recently installed a saltwater chlorine generator and wonder why I didn't do that years ago. However, I'm still having trouble getting the...
Is this a "must" have item, a "should" have item or a "waste of money" item for salt water pools? If this is something that I should have, which...
I'm looking at getting an off-line chemical feeder for our approx. 26k gallon (18x36 rectangular) pool. I've looked around online and can't seem to...
I live in NJ. This is the first season with our new pool. It's an inground pool that's 12'x30', approx. 8400 gals. I'm trying to adjust the Pentair...
I have reset the cell since replacing the original 4.5 year old cell yesterday. Test results; 3000 ppm of salt, 80 degrees, 21v 4.5 amps. The...
I apologize if this is a repeat. I already typed up this post, but I got an error message when I click submit. We just set up a 20 x 48...
All, This is the 4th year I have had a Bioguard SWG. This year during startup the check cell and check minerals lights continue to flash. I have...
Looking for input on salt vs. mineral pools. My salt generator is not performing - + 5 years old. I've been told by one pool professional that...
I'm going to clean my T-15. I've found the below directions on a couple of spots on the Internet. My question for all you pool guru's is: how do I...
I am about to get an Aquarite SWCG system. I have a screened porch about 60 feet (and around a corner) from the pump/filter cluster. I'd like to...
Hi there! New to the forum. Does an increase in water temp reduce the Cl levels typically? Asking because I noticed a drop in Cl level as water...
The wife and I just put a salt water pool in at the end of last year. We have put liquid chlorine in and ph+ to get the pool going. The SWG is...
I am 4 weeks into a new 15' X 48" metal frame intex pool using the included filter pump and an intex saltwater chlorinator. I've followed all the...
Thanks to all for the great help so far. I just turned on my Turbo Cell T-Cell 15 and I'm running into some questions. The display reads "2400" and...
Newbie to the site and have a quick question regarding the Intex Salt Water System. I bought the model 8110 last year at the end of the season and...
I just wanted to post a general Thank You to all concerned for all the research leading to these methods. I am 90% finished implementing all the...
Hi My Aqua rite salt water system is reading no flow, I have cleaned the cell and replaced the flow control valve and still read no flow. Plus my...
I have been running a Watermaid Ezy-clean cell for about 10 years now. The anode has darkened in color and there is a little pitting near the seam...
Hi all, can anybody tell me how to perform the field calibration/reset for my IC-40 swg. My salt level has been checked and rechecked and it is fine...
Hi All, I have a Pentair Intellichlor IC-40 SWG. My red no salt light is always on and my cell light is allways off, so it is not generating any...
Hello to all. I am looking for advice. I just bought a house that came with a Shasta Pool built in 2006. The pool has a QuikChlor SWC unit and...
Got my AquaRite t-15 installed and running. I took a water sample to the pool store (groan) to get the salt level checked before I added any salt. I...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules