Forum: Salt Generators (SWCG) & other Chlorine Feeders

For the last few years I have used a inline feeder for my Tri-chlor tabs. This year it was damaged during storage and after reading several posts...

Why does the Kreepy Kleer keep putting out the white cloud? I think I was told that this is the way the cells clean themselves. But can't I get it...

Guys/gals, This may be a silly question, but I'm asking anyway. I have a WaterWay Clear Water 26 inch sand filter, 200lb sand, with the inline...

I've been looking into buying a swg. And found an Aquarite Jr. which is rated for a 20k pool. I live in Texas where we are currently at 90deg. plus...

I have made some additional comments to this post as a result of questions answered in this forum. ...

_____________________________________ Saltcells.com now redirects to PoolStoreUsa.com. The BBB says it's owned by the same folks that has...

I have a ClorMatic II which stopped working -- I get lots of intermittent beeps when it's on. I've unplugged it, so don't remember what it it read...

Hi all, new to this board but I was curious if anyone had any experience with in floor cleaning systems and SWCG systems? I have a 1 year old in...

My "Low Flow" code of 92 came on for a couple of days and then was back to normal. It has done this two or three times and became normal (90)...

Sorry for the "sales pitch" but I mentioned that I would let you all know when a specific spa salt system was available... AutoPilot has now...

Not sure if this is appropriate to post here or not, but moderators, censor as you see fit. I've got a Clormatic III power unit that is functional...

Do I need to clean my SWG cells? I've read talk of this but don't really know when or why I should do this. We had our pool installed in the fall...

Anyone have any experiences with Rola-Chem chemical feeders? Primairly their Pro Series Peristaltic pumps. Thanks in advance. Scott,

Are the UV units that are around good for pools. They saw they have been used for years in commercial but residential pool use is new. :confused: ...

Just ordered a new Autopilot Digital with SC-60 cell and have some questions. I have a 24" horizontal run of 2"D PVC on the outlet of my Raypack gas...

Does anyone know the normal cell voltage and amp readings for an Autopilot Digital with SC-60 cell. I set it for power level 2 (middle of the 3),...

My Rainbow 320 is leaking from the bottom. From looking at the parts diagram, I can see that there is an o-ring at the bottom. Can I just twist...

Hey all, I was just told a couple of hours ago that I'm going to the Goldline SWCG 'pool-pro' seminar tomorrow AM @ 8 EST. Any ?s that I should...

Here's a detailed post about my results with an SWG after two full years: http://www.poolforum.com/pf2/showthread.php?p=54537#post54537 Hope...

thanks for your help.

Hi, We have a 20,000 gallon inground vinyl lined pool. We have been using Baquacil but have found it to be too expensive and not without problems. ...

Today 5/6 Woot has a SWCG on sale today - Circupool 45,000 Gallon Salt Water Pool Conversion System $649.99 * + $5 shipping ...

Just discovered this brand (Nexa, Nexa Pure, Nexa Chlor). In addition to having SWG's for in-ground pools and spas they have a unit for above-ground...

I found a real good online troubleshooting Guide for the Jandy Aquapure salt generators ...

I have an inground 40K gallon pool that currently has the aqua logic controller and salt cel. It is the most basic controller I am sure as it only...

My T cell 15 went out after 7 years of service. Bought a new one, put it into the system, first day everything was working. Generating chlorine, the...

I have an AutoPilot Pool Pilot Digital Salt Generator with an SC-60 cell. I am extremely disappointed to have a failed power supply shortly after...

Hello, Soon to be pool owner. 17K Gal Kidney Shaped pool. Concrete/Gunite/Marcite pool. Not sure what the owner is using right now. BBB or other...