Forum: Salt Generators (SWCG) & other Chlorine Feeders

Back in April, there was a thread concerning the cost of operation of a typical SWCG system. Member PatL34 did a calculation which took in to...

We have ours set at 60% right now in this Houston heat, but still not producing enough chlorine. Our CYA is 40. I was thinking of increasing the...

What has been your experience with this company and its products? I had installed a PoolEx system in 2000 (Australian made) and the electrolysis...

Hi everyone I have a brand new Jandy 700 that will not produce chlorine. My water parameters are great and I have a aquarite system from my prior...

Would something like one of these work? And would you pipe it into the pool pump's suction or return? TW (Not affiliated in any way with...

Hello all... this is only my second post and I hope its worthy:o I have a SWG in my 20,000gal plaster pool. I've been very happy with all the...

Guys/gals, This may be a silly question, but I'm asking anyway. I have a WaterWay Clear Water 26 inch sand filter, 200lb sand, with the inline...

I have had the Digital 220 installed on my pool since last week. Today 2 guys from pool builder came today and dumped 550 lbs of salt into my pool...

I have a 18x36 inground - 29,000 gallon pool. I've been hearing good things about adding a little salt to soften the water and make it a little...

I tested my cya level 2x on different days at different areas of the pool just to be sure and low and behold my CYA has dropped to 40. The owners...

I have always seen tons of posts about a pool with a SWG generator needing lots of acid. Before I got a SWG I often had to use acid to lower the...

How is this not in every pool in America with a price tag of ONLY $59.95!!! No electricity needed, no replacement parts... **Plz no red, I realize...

The pool builder said to wait 4 weeks to start my SWG. I have a new 30,000 gal shotcrete pool with white plaster. I have been scrubbing the...

Have an Aquarite chlorinator. This will be the third summer of use. Have had black algae which is now cleared, but am having trouble getting...

I have an Anthony and Sylvan pool (36000 gallons) built in 1999 it is plastered with ansel brite. I installed a Goldline SWG about 3 years ago. The...

I did some playing around with my Leslies drop type salt test kit tonight and found I can approximate pretty closely the saltyness of my pool. I...

Ok, I know this question has been answered before, but I can't seem to find it or recall. Why does the Aquarite suggest CYA to be at 60-80, 80 is...

We're having our pool built and are trying to decide between a Polaris Watermatic Dichlor Feeder vs. an Intellichlor salt system. We were wanting a...

I was all set on switching to a SWG but I think I read somewhere on here that salt will eat away or cause damage to concrete decks. I have...

We have noticed a problem with salt generators (both Goldline and Jandy have been installed in our pools) eating away at natural product coping. Has...

We have a Chlormatic CM III saltwater chlorine generator. The chlorine level has been very low lately even with the level set to 95%. Our local...

My feeder is about 9 years old and I'm trying to determine if it's working. I will fill it with 1" tabs but the chlorine level in the pool is not...

Why does the Kreepy Kleer keep putting out the white cloud? I think I was told that this is the way the cells clean themselves. But can't I get it...

I recently installed an Aquarite SWG system. Now that the summer temps have arrived, I am having a difficult time keeping the TC level up. Each...

To have a chemical free pool?? If so, how? If not, what is the "least chemical" method? We are installing a liner pool. We have a special needs...

My pool is 15,000 gal and my spa is 700 gal. In pool mode, the spa overflows into the pool, therefore the autopilot chlorinates spa and pool to the...

The Polaris Auto Clear system hasn't worked in the 2 weeks since we filled the pool and I've shocked it twice. Now even that shocking it doesn't ...

Hi, I'm a newbie, and really appreciate all the great info. The man who is going to install our pool stopped by with lots of questions and I...

Hello, I have a 13,500 gallon fiberglass pool, with an AutoClear SWG. I plan to open it in a couple weeks and get it ready for it's 3rd year of...