Using a Taylor DPD-FAS based testkit? Questions & answers here.
____________________________________________ FAQs & Guides: DPD-FAS based testing ____________________________________________ Guide to...
I've read on here and been told to use the 10 ml sample rather than the larger sample sizes in order to save the reagents.....can someone please tell...
Hello everyone. It has been a long time since I posted, but I've enjoyed and benefitted from this forum for years. I own both a "new last year"...
5/24/06 pm FC=1.5 CC=0 TC=1.5 pH=7.1 Alk=60 Cal=80 Cya=0 Temp=83 (Solar cover) Water is clean and clear.
We just got our kit and are happy to have it but not sure what to do now. We have a 16,000 gal, inground, saltwater system. Here are our numbers....
I just got back from vacation and received my test kit. While I was away, it rained a couple of times, so I thought that I would use my new kit to...
Hi all. I have a vinyl liner pool 20x40 aprox 23,000 gallons according to my calculations FC=2 CC=1.5 TC=3.5 PH=7.5 ALK=200 CAL=190 CYA=80
IG Diamond Brite pool approx. 20000 gals fc = 2.5 cc = .5 tc = 3 pH = 8.2 alk = 100 cal = 400 cya = 40 temp = 91
OK, so really it is my second full test, but I thought the 51 degree H2O might have affected things. Here are my numbers: FC 1 CC 0 TC .5 pH 7.6...
I just filled my pool with trucked water yesterday. I get full sun from about 9am til 7 pm with partial shade from 3-4 pm. We got about 5 small...
As a continuation from my post in the other forum, I had my water tested at the pool store prior to opening my pool and the results were as follows:...
I received the ps234 kit yesterday, however I was on vacation for a week and put 7 tri-chlor pucks in before I left on vacation. Here is what I came...
Beautiful day here so I decided to test my water for the 1st time this season. The pool is still covered. My 1st question is at what temp would...
Tested today. and Here are my results: Date: 7/4/06 FC: 3.5 CC: 0 TC: 3.5 pH: 7.5 Alk: 70 Cal: 80 Cya: 22
I just received my new PS234 test kit and these are my numbers: FC: 1.5 CC: .5 TC: 2.0 PH: 7.6 Alk: 110 Cal: 60 Cya: 50-60 Temp: 82...
I just tested my pool and got these results. 16000 Gal FC-4 TC-5 PH-7.2 ALK-140 CAL-210 CYA-20 Pool temp is 83
FC - 1.5 CC - 0 TC - 1.5 PH - 7.5 ALK - 70 CAL - 290 CYA - 39 Salt - 6000
Here's my results........ FC 4 CC 2 TC 5 PH 7.2 Alk 60 Cal 50 Cya 80
My Taylor K-2006 came with 0.75 ounce bottles of reagents. If I purchase the 2 oz. refills, will I still be able to fit them into the blue kit and...
2-wk-old pool and first-time pool owner has ?s about chlorine levels and calcium. Very first test results posted over a week ago in general testing...
Hello all, I have a 30' AG pool, and I did my first test of the season. Now, we live in Western NY, so we will not even start opening the pool for...
Hello all! It has been awhile since I've posted....but I own both a PS232 and a PS 234 testkit. I have a 30' round AG pool with about 20k gallons. ...
For the first time since converting from Baq last July, I entered the dreaded pool store for a water analysis. I am out of CYA reagent and with the...
26,400 gal Vinyl SG 3100 PPM FC 8 CC .5 TC 8.5 PH 7.5 ALK 130
We plastered and filled our gunite pool on 6/3. It's 50x20x10deep, but with large benches and shallow play area, so we watched our meters and got a...
I have a 32,000 gal inground, vinyl with a Aquarite SWG. I used Ben's kit for the first time today. (I felt like some kind of mad scientist with all...
I shocked my 300 gallon spa with 12 oz of liquid chlorine 8.25%. This was a week following it's first fill of the season after I added an initial...
To do my tests, I go get a cup of water from my pool and bring it in my office. I spread Ben's kit out on my computer desk and test everything each...
Hello all, Let me start by saying this site is a wonderful resource, loaded with great information. Some back ground info: we are completing a...
Hello all: I received my PS234 Kit today and tested my water. We just built and filled (3/5) our new gunite pool. It is about 30000 gallons. I...
I was just wondering if there has been any news on when the next kits will ship? I ordered June 1 and haven't received a shipping date. We have...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules