Using a Taylor DPD-FAS based testkit? Questions & answers here.
____________________________________________ FAQs & Guides: DPD-FAS based testing ____________________________________________ Guide to...
I have a 16X40 IG pool, about 25,000 gallons. The liner went in Tuesday night and it took nearly two days to fill it. (This is in metro Atlanta....
Hello, i was wondering what are the limits of the new test kit, how high can it test free chlorine levels and cya ect. i looked at the FAQ page but...
Maybe a stupid quetion but here it goes. When testing CYA I know that you stop when the dot just disapears. The question is do you wait a second...
Here are first test results... FC = 1 CC = 0 TC = 1 pH = 7.6
HI to all, I got my new kit and love it - everything is organized so well. I don't have a book that tells me what the results mean - or maybe...
Okay - the first test with the test kit showed that I had high CYA (100). So, I decided to do a partial drain and refill. I think I am good to go...
For those of you who have one of the old kits previously sold on Pool Solutions website and need refills, take a look at the following link. It has...
I did my Baquacil to bleach conversion late last summer and bought Ben's kit. It is great! 2 questions: I have kept it inside. Will it still be...
Just got my pool cleaned/vac'd yesterday and looking pretty good. I let the pump run all night and just tested my water this morning. The water is...
To do my tests, I go get a cup of water from my pool and bring it in my office. I spread Ben's kit out on my computer desk and test everything each...
fc .5 cc 0 tc .5 ph 7.2 alk 40 cal 120 cya 0 28,300 gallon ig gunite pool where should I start? water actually looks pretty clear, brown...
here are my results: Ph 7.2 FC 1 CC .5 TC 1.5 Alk 60 Cal 230 CYA 40 last year I recorded this as my goals on the last column of the test...
My eyes are not that comfortable in our pool, not sure why. Here is the latest: fc: 1 cc: 0 tc: 1 ph: 7.4 alk: 50 cal: 150 cya: 60 gallons:...
here are my results: Ph 6.8 FC .5 CC 1 TC 1.5 Alk 100 Cal 150 CYA 40 would love to hear your suggestions.
Hi, here are our first results of the season for our gunite pool: fc 3 cc .5 tc 3.5 ph 7.2 alk 60 calc 120 cya 30
Greetings! I received my test kit this morning, and here are my results- FC-4 CC-0 TC-4 pH-7.3 Alk-110 Cal-30 CYA-30 Temp- 84
FC - 1.5 CC - 0 TC - 1.5 PH - 7.5 ALK - 70 CAL - 290 CYA - 39 Salt - 6000
Just finished building my new pool and tested water with the new kit. water sat for about a week before could get pump up and running. FC 10 CC ...
Received the PS234 new kit - I think I had finally gotten things under control but its nice to get confirmation using this kit. FC = 8 CC = 0 TC...
At the beginning of the season, I bought the Taylor K-2006 kit, at the recommendation of this site. The kit is infinitely better than "guess strips"...
Recently, I read somewhere on here, that the PS234 was better than another comparable brand name test kit, but I cant find the post, and I dont...
This is my first purchase from Pool Solutions. Just did the tests this a.m. Instructions were clear and straitforward. FC: 4 CC: 1 TC: 5...
Hi, love the new kit but concerned about difference in ALK reading. PS233 FC 3 CC .5 PH 7.4 ALK 130 CAL 270 CYA 75 Temp 84 PS234 FC 3 CC .5 PH...
First time pool owner with new pool ( has had water in it for 3 weeks). It is approx. 22,000 gal IG, diamond brite finish, pool pilot dig220 swcg,...
I just filled my pool with trucked water yesterday. I get full sun from about 9am til 7 pm with partial shade from 3-4 pm. We got about 5 small...
Hi I want to thank everyone for their great pool advice my new pool water has been crystal clear and clean since we opened it using the bleach borax...
I have to say I am completely happy with all of the great advice I received from everyone last year!This is our first opening and my numbers are as...
Just starting the PoolSolutions regimen and have the PS234 kit. Opened pool this weekend and: Water is cloudy (can barely see the bottom step in...
Is anyone working on getting the Bleach Calculator link to work?:confused:
26,400 gal Vinyl SG 3100 PPM FC 8 CC .5 TC 8.5 PH 7.5 ALK 130
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules