Using a Taylor DPD-FAS based testkit? Questions & answers here.
____________________________________________ FAQs & Guides: DPD-FAS based testing ____________________________________________ Guide to...
Filled pool week ago then shocked with liquid shock from Leslies and been using Chlor-Brite dichlor 1 ounce a day. Pool holds 5700 gallons. Today...
I was just wondering if there has been any news on when the next kits will ship? I ordered June 1 and haven't received a shipping date. We have...
I have the PS234S - upgraded form the 233. I just did the salt test last night and it says I have 4000ppm Salt. I did it a second time (same water...
Ok...Figured out how to use my testing kit. It's a taylor K-2006. This is just water out of my tap...since we are starting to fill the pool today. ...
I got my K-2006 test kit a few weeks ago and I think Taylor kinda missed the boat on the Powder with the little dipper for the chlorine test. My...
OK, so really it is my second full test, but I thought the 51 degree H2O might have affected things. Here are my numbers: FC 1 CC 0 TC .5 pH 7.6...
I need to raise the ph in my pool- taylor test kit only provides info for raising with soda ash and I want to use Borax- how much to use? Do I...
I have a Taylor test kit that I've been using for years, and usually get a new kit every 2 years. My kit is stored in my garage and does not see...
FC - 21 CC - .5 TC - 21.5 PH - 6.8 or < (yellow) Alk - 60 Cal - 40 CYA - 0 Temp - @40 IG, Vinyl liner @22,000 Gal. W/chlorine that high,...
I'm finally getting around to replacing the generic test kit that came with the house when I bought it with a proper dpd-fas. Is the Taylor K2006...
Is there a nifty chart/formula/calculator (like the bleach one) somewhere for adding Borax? something like... to raise you pH: for every .1...
Hello, I'm somewhat new to this forum, so please excuse me if this question is redundant. I have an issue with CC, when I use the...
Love my K-2006! I will clearly need to replenish R-0871 soon. The larger bottles of R-0871 are quite a bit cheaper than the 0.75 oz. The...
Hi, I got Ben's test kit at the end of last season and just started using it. It's all a bit overwhelming at first, but after several uses most...
FC=39PPM (Yikes!!!) added a level scoop of DPD powder, not a rounded scoop correct? DPD #2 solution dropper bottle is VERY difficult to control! ...
Hello - My numbers are FC 5.5 CC .5 TC 6 ph 7.8 ALK 170 cal 160 cya 20
I have a 20x40 vinyl pool ~32000 gal. Sand filter. Pump 24x7 Waiting for test kit I dumped MANY gals of bleach. 2 2lb boxes of Borax and 8 lbs of...
I think the pH in my water is testing about 7.4 or maybe 7.6. I have a devil of a time deciding where I am on the pH scale. Seems like there are...
I just opened a new bottle of dpd powder. I put in two scoops and begin adding drops of fas-dpd reagent. The pink disappears around 2.8 but the...
Haven't been able to keep chlorine all summer long in 2 yr old pool. Leslie's was having me spend lots of money "trying" different methods and no...
Hello I would like to say that this is a great site. I have a 15 x 30 ABG that my son and I moved to our house, so we have just opened it. A good...
OK Folks, I received Ben's PS234S kit and was able to finally see what all the "hub-bub" is all about. This kit exceeds any others I have seen,...
here are my results: Ph 6.8 FC .5 CC 1 TC 1.5 Alk 100 Cal 150 CYA 40 would love to hear your suggestions.
FC = 0.2ppm CC = 0.2ppm pH = < 7 - 6 Drops to 7.4/7.6 TA = 30ppm CH = 120ppm CYA = < 30ppm What should I add first using the BBB method? How...
I know this is probably the wrong place to post this but I couldnt see where it would fit....any way,,,,I have had the PS233 for a couple years. And...
Should the dpd powder go bad before a year? I keep my kit (PS233) in doors at all time. I bought a few refills last year, including dpd powder. Now I...
I have received the PS234 Kit and have been using it for ~2 weeks for testing my pool. Love the Kit so far. I am ready to bring my SWG on-line...
FC - 1.5 CC - 0 TC - 1.5 PH - 7.5 ALK - 70 CAL - 290 CYA - 39 Salt - 6000
using PS233 I get a PH of 7.5-7.6 but Henna PHep4 shows a ph of 8.I had just did a two point calibration on the meter. Is there a reason for the...
I'm testing cya with my 2006 kit. Everything is ok, ch. is 3.0 but cya vile goes to the top with the water and its barely cloudy. So how do I get an...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules