Forum: DPD-FAS based testing

Hi Received my ps234 and tested my 24' AG pool last night. I uncovered the pool yesterday for the first time this year. Here are the results: FC 22...

First time posting. Here are the results from the PS234 kit FC:10.5 CC:0 TC:5 (was slightly darker than the highest reading of 5) PH:7.4...

20x40 pool....3.5 ft - 8ft vinyl.....400K BTU Heater water temp about 70F FC = 5 CC = 0 TC = 5 Ph = about 7.3 or 7.4 Alk = about 140 CYA =...

I have a 16X40 IG pool, about 25,000 gallons. The liner went in Tuesday night and it took nearly two days to fill it. (This is in metro Atlanta....

My pool is an 18' above ground with a capacity of about 8000 gallons. (54") deep. I tested the water to get an initial reading but it is only half...

I am a few days into converting to an AutoPilot Dig220/SC-60, so I expect to see the Cl levels fluctuate as I adjust the unit. But, here is what I...

I opened my 24 agp 2 days ago and have been fixing a leak in the return. Water weas crystal clear! 14k gallons or so. Just tested: FC - 13...

I just tested my pool and got these results. 16000 Gal FC-4 TC-5 PH-7.2 ALK-140 CAL-210 CYA-20 Pool temp is 83

Hello, Like the post says....Is it OK to pour the test vile/water/chemicals back in the pool or should I pour it on the lawn or what? I have not...

I have a 19,200 gallon pool. Last year was my first year of pool ownership and I used Baquacil. The prior owners used chlorine. This year I've taken...

I have been visiting this site for 3 years -- learned a lot. I finally bought the test kit. My results are fc-2.5 cc - 0 ph - 7.2 alk - 70 cal...

I have a 20x40 vinyl pool ~32000 gal. Sand filter. Pump 24x7 Waiting for test kit I dumped MANY gals of bleach. 2 2lb boxes of Borax and 8 lbs of...

18' Above Ground, 8000 gallons or so. I'm assuming I need stabilizer. I put 2 stabilized pucks in a floater three days ago since I didn't have my...

Last year maintaining my pool was a nightmare, spent $1500 in one season on poolsupplies!!:( Found this site over the winter, got Ben's kit,studied...

5/24/06 pm FC=1.5 CC=0 TC=1.5 pH=7.1 Alk=60 Cal=80 Cya=0 Temp=83 (Solar cover) Water is clean and clear.

I've found a work-around solution to the tip problem, which causes undersized drops with the CHL#2 and SALT#2 reagents. Wipe the tips with a damp...

First of all, I've been lurking on this forum since last summer and I'm amazed at the wealth of valuable knowledge! I have a 26,000 gallon IG vinyl...

Hello, I added 320 pounds of salt to my 13,500 fiberglass pool last night and today I tried to test it with my new kit with salt testing. It...

I have a 14 by 28 inground vinyl liner pool. My chlorine is high should I just let it burn off and shock it? FC 18.0 CC 0 TC 20 + Brown PH 6.8...

18' A/G pool 8000 gallons Have had some electrical problems with pool pump among various other issues. but DID add the stabilizer to the skimmer...

When testing for CC, is any change in color supposed to happen immediately? In my tests, after the five drops, the tube stays clear 99 percent of the...

I just filled my pool with trucked water yesterday. I get full sun from about 9am til 7 pm with partial shade from 3-4 pm. We got about 5 small...

Just starting the PoolSolutions regimen and have the PS234 kit. Opened pool this weekend and: Water is cloudy (can barely see the bottom step in...

I am using the PS233 kit for the first time and I want to be sure that I am doing the CYA test correctly. The instructions say to use the #9194...

Is anyone working on getting the Bleach Calculator link to work?:confused:

We plastered and filled our gunite pool on 6/3. It's 50x20x10deep, but with large benches and shallow play area, so we watched our meters and got a...

FC = 12.5 Lowered dial down on SWG ( now at 20 was on 40) CC = .5 TC = 13 PH = 7.2 Trying to lower TA TA = 140 CAL = 200 CYA = Was below 100...

I have done everything. I stuck pool is now blue but still cloudy. Please help I have 10,000 above ground pool sand filter. I believe I have kill all...

28K GA / IG / Diamondbrite / SWC / DE filter pH 7.4 / FC 5 / CC 0 / CYA 50 / Ca 220 / TA 100 / 87 degrees My PS233 test kit readings of Ca...