Using a Taylor DPD-FAS based testkit? Questions & answers here.
____________________________________________ FAQs & Guides: DPD-FAS based testing ____________________________________________ Guide to...
Hypothetically speaking, I am testing my free chlorine and this is the equation, .02X6=0.12. How do i interpet this answer? Would I say my FC level...
I'm testing cya with my 2006 kit. Everything is ok, ch. is 3.0 but cya vile goes to the top with the water and its barely cloudy. So how do I get an...
FC = 0.2ppm CC = 0.2ppm pH = < 7 - 6 Drops to 7.4/7.6 TA = 30ppm CH = 120ppm CYA = < 30ppm What should I add first using the BBB method? How...
Is it typical for the little testing dipper that comes with the R-0870 reagent to turn a rusty brown color with use? I'm guessing it's oxidation?...
I have the PS234 testing kit. I bought the correct replacement regents from Taylor. My question is do I need to put the Taylor regents into the PS234...
I shocked my 300 gallon spa with 12 oz of liquid chlorine 8.25%. This was a week following it's first fill of the season after I added an initial...
_________________________________________________ Admin Edit: Please use the updated version of this post. PoolDoc ...
I went to the pool store to buy reagent for testing chlorine, I was sold Taylor R-0003, this test reagent is not for testing chlorine. What is it...
Any suggestions on the best place to purchase Taylor reagent refills. The last two times I have gotten refills that expire within 2 to 3 months....
FC - 21 CC - .5 TC - 21.5 PH - 6.8 or < (yellow) Alk - 60 Cal - 40 CYA - 0 Temp - @40 IG, Vinyl liner @22,000 Gal. W/chlorine that high,...
Powder turned dark grey/black during the winter. Is it still usable and accurate?
_____________________________________________ This was discussed in a thread from 2015, but is now updated here. Since all the almost all the...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules