Forum: DPD-FAS based testing

so we know the cl bottle is bad so just wait for my new tip, in the mean time use my 233 despencer. so okay on my 233 (purchased the last halve...

I'm very sorry, but we've been in a 'hold' mode on the kits since last Wed or Thurs, since discovering widespread problems with the dropper tips on...

I've found a work-around solution to the tip problem, which causes undersized drops with the CHL#2 and SALT#2 reagents. Wipe the tips with a damp...

I've tested with my two test kits, P234 & 5-Way HTH. The HTH test kit is from Walmart and is brand new. All the numbers match except for the...

Preface: I have metals in my water. I believe I've got them under control. The cloudy water is a bit of a pain so I figured I'd post my new...

My old PS233 test kit's label is quite worn and wrinkly. Any ideas on where to get the label printed so it can be erased without removing the ink...

Has anyone had any problems with the calcium hardness test (Taylor K-2006) after shocking with non-chlorine (potassium monopersulfate) product? Per...

I have the PS234 testing kit. I bought the correct replacement regents from Taylor. My question is do I need to put the Taylor regents into the PS234...

_____________________________________________ This was discussed in a thread from 2015, but is now updated here. Since all the almost all the...

18' A/G pool 8000 gallons Have had some electrical problems with pool pump among various other issues. but DID add the stabilizer to the skimmer...

Got the liner leak found and fixed (the pool drained all but 14" of water over the winter!). It's funny how a tiny, tiny hole can leak a LOT of...

I just received my test kit and here are my numbers. I have a 35K gallon in ground vinyl pool with salt generator. TC 5ppm TA 180 pH 7.2 ...

my PS234 reports salt at 2200ppm (11 drops). That sounds *very* low. AutoPiiot reports 2900 Leslie's reports 3000 (strip) I've tested it 3...

Got the complete kit yesterday, with salt water. Here are the results: TC 1 FC 1 Ph 7.4 Alk 80 Cal 480 CYA 0 Salt 2800-3000 (Did I miss...

Here are my latest results. Lowered my Alk and have been running my pump like a champ! FC - 3.0 CC - 0 TC - 3.0 ph - 7.5 Alk - 140 Cal - 20...

This is off of my 3rd test with the kit. Any inputs? FC = 5.5 CC = 0 TC = 5.5 PH = 7.4 TA = 130 Had lowered PH to get this down. Was at 180...

Here are first test results... FC = 1 CC = 0 TC = 1 pH = 7.6

Hi, love the new kit but concerned about difference in ALK reading. PS233 FC 3 CC .5 PH 7.4 ALK 130 CAL 270 CYA 75 Temp 84 PS234 FC 3 CC .5 PH...

Hello Everyone, I was very excited today to receive my PS234 testkit. After spending the last month reading as many past posts as possible I...

Hello, We've got an IG gunite pool, 16'x30', approx. 17000gal. The house was built in 1971, pool has got to be pretty old, the pump sure looks...

Received my PS234 today and tested: FC 4.5 CC 1 TC 5.5 pH between 7.2 and 7.5, probably 7.4 Alk 130 Cal 300+ (I quit after 30 drops -- no...

Hi all. I have a vinyl liner pool 20x40 aprox 23,000 gallons according to my calculations FC=2 CC=1.5 TC=3.5 PH=7.5 ALK=200 CAL=190 CYA=80

Hi everyone, I am a new pool owner this season, and have learned a ton from you all. I had been using test strips until today when I received my...

To do my tests, I go get a cup of water from my pool and bring it in my office. I spread Ben's kit out on my computer desk and test everything each...

I have a 32,000 gal inground, vinyl with a Aquarite SWG. I used Ben's kit for the first time today. (I felt like some kind of mad scientist with all...

Any feedback? (You may have given me feedback on algae thread -- if so, thanks!) 7/15/06 FC - 19 CC - 0 TC - 19 pH - 7.6

First Test Results w/PS234: FC 4 CC 0 TC 4 pH 7.6-7.7 Alk 110 Cal 150 Cya <20 (pool store said 10 two weeks ago) Temp 88

FC=4.5 CC=0 TC=4.5 PH=7.5 ALk=90 CYA=55 Temp=92 28' AG Round with vinyl liner. I am using Autopilot digital with the SC-60 cell. I am...