Which kit? Why? How? What does it all mean?
____________________________________ How to Get the Testkits You Need! ____________________________________ We constantly ask people to get...
__________________________________________ Beginner's Guide to Pool Chemistry & the BBB Method __________________________________________ . ....
__________________________________________________ FAQs & Guides: Testing & Adjusting Pool Chemistry Getting the RIGHT test kit for your pool ...
Hi everyone, We just had our new IG gunite pool plastered and filled on Monday. The guys came out today for the initial start-up and added 2...
My gunite pool is about 3 weeks old now. I have been keeping the water balanced with Ben's test kit. Today's readings are" FC 1 or 2 PH 7.8 ALK...
Okay, I usually just scan your posts and keep quiet, but this year I have opened my pool and have a little problem. Here are my measurements for...
Which chlorine test Kit for numbers over 5 should I get and where can I get it? An example would be if one wants to know if one has 6ppm versus...
My initial reading this year was over 100+ . When I started filling the little tube, I would be less than 1/4 inch and the black dot was gone. I...
Pool is IG, plaster, one week old. 33,000 gals Chlorine is 5ppm (Just shocked it last night, it will probably be gone this afternoon.) Ph is 7.0...
Typically I lower the total alkalinity with acid, and it always stays in line with my ph, however now my ph is around 7.5 but my total alkalinity is...
Is there a formula you can use to find out how long it takes for your water to fully cycle through? I had to backwash this morning and add more...
Here are my results. (i have a 25k gallon IG concrete (i think) pool) FC-0 (as expected) TC-0 (as expected) CC-0 (as expected) PH-8.0 Alk-60...
Just started up my new 10000 gal Pebbletec pool 2 weeks ago. The pool company came by within those 2 weeks a few times and took care of the water for...
I will be getting a vinyl lined pool with SWG. Will I still need a test kit as comprehensive as Ben's? I have read mention on here before of a...
What would the difference be in attempting to raise pH of using one versus the other? Is there any harm in the soda ash? I know Ben recommends the...
I dont want to go to a pool store, so does home depot carry something like this? whats the cheapest place to get it?
Currently, once a week I add about 1/2 gallon of acid to my pool to bring it down from 7.8ish to 7.2 It's a new pool (Oct) and I've got a SWC. Was...
Has anyone else tried this CL test method? I am a colorblind CPO. It really works great.
Hi, I just found this forum and looks like there's lots of good info here. I have a small IG gunite pool (10k gal), chlorine with a DE filter. I'm...
We finished our new IG, 11,000 gallon, plaster pool and spa with a SWG, in September 2005. The first thing I did was fire the pool man that came with...
I have Ben's test kit with the combination PH and Chlorine tester. I have a hard time telling the difference between the shades of red. I can't tell...
We have been having problems with our pool for a while and finally seemed to get them under control. But today I tested and it seems our pH is low! I...
Here's the deal. We just had our pool installed (specifics are in my signature). I've been testing the water almost daily (only skipped a day or...
Until I can buy a new test kit I am using my kit that only tests up to 5 ppm of chlorine. I know I have read on here before about using that test...
About 6 years ago I stumbled onto this website and learned a lot of good info. Unfortunately for me I haven't been able to access here for a while...
I'm getting ready to buy a house that has an inground pool and a hot tub and I need a place to start learning what it is we'll need to do to make...
I guess the heading says it all. I have not tested or added chems since I closed it up in early November. Also, how do I figure the volume of my...
I ordered the new test kit last fall and opted to get delivery this year. I don't think the salt test were included. I don't know for sure. Will I...
I haven't been here in a VERY long time and was wondering if Ben was still selling the kits. Time for a replacement for me. Thanks so much! :)
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules