Salt unit display

[exit63]

Hello. I just had a Goldline Aqua Rite salt generation unit installed. Does any one have one of these? I have a question about the LED display. There is nothing in the manual about what each number means. I know the first one displayed is the salt ppm and the next is water temperature. I have no clue what the others mean. A couple of them have symbols in front of them that look like Klingon,(kidding)
Do you know what the different things mean on the display when I push the diagnostics button?
Thanks

[Pool Clown]

Average salt
push
Water temp
push
cell voltage
push
Cell amps
push
cell output in %
push
instant salt reading
push
Product code
push
Software revision

Since the cell runs in both directions, turn the unit to off, then back on, and then take readings again in the cells other direction (cell volts and amps).
Wait 30-40 sec for readings to settle down before noting the readings.

[Watermom]

I'm gonna move this thread to the saltwater forum where folks who have saltwater systems and are more likely to be knowledgeable about this problem are more likely to see it!

Welcome to both of you, exit63 and Pool Clown!