how to tell if gauge is broke or pump about to blow?

[rastoma]

I just uncovered the pool today and adding water (drained it below the return over the winter).

When it had enough water I turned on the pump and everything sounds normal. But the gauge on the sand filter is maxing out at 100psi. I backwashed for a min but it wasn't dirty and psi didn't drop.

Is it just a bad gauge you think? Anyway to tell for sure other than just buying another gauge?

[waste]

Does the gauge drop to 0 when the pump is off?

I'd suspect the gauge first.

However, how's the return action?

Lucky you to have the pool open already:D - Hope you have a great season!

[aylad]

If you left the gauge outside at all when the air temps were below freezing, then it's a goner for sure....they are fairly inexpensive and easy to replace. Try replacing it and see what you get.

Janet

[Poconos]

If it was really reading 100 psi I wouldn't want to be near the sand filter. I think they're typically rated for 50 psi max. Besides, regular pool pumps can't hit that high pressure. Gauge is croaked.
Al