octpool
04-28-2006, 09:18 PM
I have a shotcrete pool and spa that is near completion. The problem I have is that an octagonal spa is not exactly octagonal, one side is about 10 inches longer than the shortest when all should be equal. My pool contractor and I agreee that changing two wall by approx 4 inches would fix the problem.
The dilemma is how to add about 2 inches of material to the shotcrete walls without problem of future separation from the original shell.
Any suggestion or advice??
The dilemma is how to add about 2 inches of material to the shotcrete walls without problem of future separation from the original shell.
Any suggestion or advice??