PDA

View Full Version : Blowing Out Lines- Fall Closing of Pool



Spurgeon
09-28-2008, 09:13 AM
It is time to close the inground pool and we use a shop vac to blow out the lines.

I can never remember the setting to use on the sand filter to accomplish this. We usually blow air through the backwash line coming out of the filter.

Can someone remind me where to set the lever on the top of the filter to blow out the lines?

Thank You
Spurgeon Chapman

Pamsel
09-18-2009, 12:43 PM
We have a multi-port and set it to "Filter" on ours.