PDA

View Full Version : Sand Media from Walmart



stma
06-05-2008, 09:57 AM
Me again.....retained 30PPM FC for the past 30 hours or so and still can see the bottom....pressure is strong at 11psi with no need to back wash, even after a thorough brushing....skimmer sock has been in place for days now without the need to clean or change out (although it is picking up alot of scum)...
As posted way earlier, i had needed to purchase a new lateral/stand pipe for the 164 Hayward filter...With the install of the new laterals, i also "treated" the filter to new sand.....I paid Walmart $3.72 per 50 lb bag INSTEAD of the $9.50 the pool store wanted....(My filter uses 100lbs)......now based on those dollar amounts, Am I essentially "getting what I pay for" using the Walmart sand ???...SHould I have opted for the pool store sand instead ?? Could the sand actually be my green water problem ??

stma
06-05-2008, 09:58 AM
As to the above thread...suppose to read "I STILL CANNOT SEE THE BOTTOM" !!!!!!!!!!!!!!!!!

JohnT
06-05-2008, 10:19 AM
As long as it's pool sand, you are okay. Play sand etc. are not the right thing.

Green water is a chemistry issue, not a filter issue.

stma
06-05-2008, 10:49 AM
Thanks John....above it all the pool water is still super cloudy...and I thought using the slkimmer sock would have atleast taken care of "that" problem....thats why I questioned the sand itself...

aylad
06-05-2008, 10:57 AM
The cloudiness is dead algae, which just shows that you are making progress. Keep the chlorine level up and the filter running!

Janet