Anybody have fiberstars jaxx/fx spa light

[johnm92627]

I have the 120v version of the the jazz/fx spa light.
http://www.fiberstars.com/assets/ps/prods/JazzSpaManual.pdf
It worked for about 2 days and then it stopped. It was tripping the GFCI so I pulled it out and noticed it had water inside. I have now dried it out and it still trips the GFI. I am testing it out of the spa. Any thoughts if the light will dry out and work or if I need to replace it.
Thanks, John.

[huskyrider]

Have it replaced under warranty if it's new.
If it's not new you can try removing the lens cover, drying it out, and putting a little Magic Lube on the lens gasket.

I'd call it 50/50 if it'll hold the GFCI from tripping, they're very sensitive in a neutral fluctuation.

See ya,
Kelly

[johnm92627]

It was one of those eBay items. I'm good friends with the fiberstars rep. I'll see if he can replace it.
I removed it out of the spa and tested it off the GFCI just to see what would happen and the light works but the wheel doesn't spin. I like the the LED lights better with no opperable parts.