New here...

[steveinaz]

Hello all. Having our first pool built in December, 16 x 30 in-ground gunnite (Master Pools). After much research I decided to go SW chlorination right off the kick. I couldn't seem to find a "down side." We're doing an in-floor cleaning system as well and a small natural rock waterfall. Aside from that, it's a pretty basic 3.5' shallow end to 6' deep end pool.

Look forward to picking your brains for info, I'm not totally "pool dumb" as I used to care for peoples pools as a teen quite a bit, but at 44 I'm a little behind the latest technologies and so forth.

Just starting and I'm already a little leary of the SWG my builder is using (though the builder has an outstanding reputation/many awards). They're using the A&A Manufacturing QuikChlor, which took me awhile to get any info on.

Anyone know a supplier of parts for these? Opinions on this product?

[dawndenise]

http://www.aamfg.com/dealers/quikchlor.aspx

This website is their home page. There's a section where you can click on accessory products as well as "find a dealer."

I can't help you with an opinion on the product, as I've just begun using a Goldline Aquarite SWCG. The product was selected by my PB. After some equipment issues right from the start, things were quickly straightened out (Goldline did a warranty replacement without hesitation), and so far, so good on the generator!

[waterbear]

They are the manufacturer of the Magnasweep in floor cleaner. This system has been around for a while. Don't really know too much about their other products, however.

[steveinaz]

Thanks for the additional info.