nu2pools
04-13-2006, 12:44 PM
I can't get my Hayward Northstar strainer cover off. Is there some trick to it?
Thanks
Davenj
04-13-2006, 12:56 PM
Mine is difficult (stuck) at times also. I keep the gasket greased and that seems to help a little. It is alot harder to remove than my old pump was. Not much help!
thepoolman1
04-13-2006, 01:00 PM
Try loosening the cover with the pump running. The suction of the pump should pull the lid down just enough to allow the ring to move.
nu2pools
04-14-2006, 08:38 AM
Thanks poolman1. I'll give it a try.