My PS233 Results and Questions

[errodr27]

I have a 20x40 IG vinyl pool, I am using the PS233 test kit.

Here are my results:

FC=2
CC=0
TC=5
PH=7.5
ALK=60
CYA=5

Temp: 88

The water looks pretty clear. My ALK level seems a bit low? What should I bring it up to? Overall how do the results look?

Thanks...

[duraleigh]

Is that CYA = 5 correct or a typo?

[errodr27]

Is that CYA = 5 correct or a typo?

That's 5, I know I need to add stabilzer. Is that what I ask for at the pool store?

Thanks...

[duraleigh]

The PS233 only tests 20ppm at the lowest. How did you get that result?. I'm not badgering.....it just needs clarification before anyone recommends anything else.

[errodr27]

The PS233 only tests 20ppm at the lowest. How did you get that result?. I'm not badgering.....it just needs clarification before anyone recommends anything else.

It is a guess based upon where (nearly the top) I was unable to see the black dot.

Thanks...

[duraleigh]

Okay, I understand, now.

I would recommend adding enough stabilizer (also called CYA or Cyanuric Acid) to get to 30ppm. Dosage will be on the container and you can get it at Lowe's/HD or any pool store.

I would also add 10 lbs of baking soda to get somewhere around 100ppm for Alkalinity.

I would up the Cl just a little and keep it between 3-5ppm.

[errodr27]

Okay, I understand, now.

I would recommend adding enough stabilizer (also called CYA or Cyanuric Acid) to get to 30ppm. Dosage will be on the container and you can get it at Lowe's/HD or any pool store.

I would also add 10 lbs of baking soda to get somewhere around 100ppm for Alkalinity.

I would up the Cl just a little and keep it between 3-5ppm.

Thanks for the tips!

[errodr27]

Thanks for the tips!
What is the best way to add Baking Soda to the pool?

[duraleigh]

Straight into the skimmer, pump running