View Full Version : Engineered Drawing
markeast
07-10-2006, 11:38 AM
Does anyone know how I would go about getting an engineered drawing for a Kafko 20 x 34 Tahiti?
markeast
07-10-2006, 04:05 PM
Is it possible that a 20 x 34 Kafko Tahiti (free form) is only 16 foot wide at it's widest point?
Sherra
07-10-2006, 04:17 PM
Have you contacted Kafko? http://www.kafko.com/default.htm
markeast
07-10-2006, 04:29 PM
I did call them. The guy I spoke with seemed a little guarded and referred me back to the dealer. He did say the pool is measured from the widest point of the deep end, "usually." I think I'm going to call again and ask for a copy of the dig spec's and/or installation manual, or really just anything that shows the actual dimensions of the pool. Thanks.
markeast
07-11-2006, 10:09 AM
I have now been informed by Kafko that the 20 x 34 Tahiti pool is really only 16 ft. wide from coping to coping. It's 20 ft wide if you include some of the decking, etc.
hancop
07-11-2006, 12:43 PM
That does not make sense to me as a 16*32 pool is 16 feet wide from coping to coping and 32 feet long from coping to coping. Something is not right here.
markeast
07-11-2006, 02:27 PM
Our 20x34 pool is only 16' at the widest point (coping-to-coping). We thought the builder made a big mistake, since he had admitted to making an error in the shallow end that required a special "custom" liner. The liner was manufactured by Latham Plastics, the parent company of Kafko. When I called Kafko this morning the person I spoke with said the pool is actually 16' wide.