baggs03
06-26-2006, 11:21 PM
Hey everyone-
Yesterday, I noticed a had a small (pin hole sized) crack in the casing of my Polaris Pump that was spewing water. I put some PVC cement on it to close it, but when I checked it today, the crack had spread greatly and now spans about 180 degrees around the pump case. I would describe the crack as hairline and it's located on the edge of the top/front of the cylindrical pump.
Can I fix this with some epoxy or other means? Or do I need to get a new Polaris pump? If installing the new pump something I can do without much trouble?
Thanks!
baggs03
Yesterday, I noticed a had a small (pin hole sized) crack in the casing of my Polaris Pump that was spewing water. I put some PVC cement on it to close it, but when I checked it today, the crack had spread greatly and now spans about 180 degrees around the pump case. I would describe the crack as hairline and it's located on the edge of the top/front of the cylindrical pump.
Can I fix this with some epoxy or other means? Or do I need to get a new Polaris pump? If installing the new pump something I can do without much trouble?
Thanks!
baggs03