Alam555
12-31-2015, 10:44 AM
Hello,
New user to pool and this forum. The pool and equipment has been well taken care of. I have the following
Pentair Easy Touch -4
Heater Pentair Heater 450
Pump Pentair Pump VF
I just bought the house and everything was working fine until I turned the temperature to 86 and since the the heater keeps shutting off and on after it reaches 81. It comes on for5 seconds, I hear the burner go on, warm water flows, and then it shuts off. After about 2 minutes, it turns on again.
I did some research here to try and troubleshoot and figured it was low RPM of the pump, but I have a VF pump so I tired increasing the GPM. Didn't work. Now the heater constantly restarts. Another thing I noticed in the pump status is the. "Filter Error" message. I haven't been able to locate what that means or how to fix it.
Thank you
Regards
New user to pool and this forum. The pool and equipment has been well taken care of. I have the following
Pentair Easy Touch -4
Heater Pentair Heater 450
Pump Pentair Pump VF
I just bought the house and everything was working fine until I turned the temperature to 86 and since the the heater keeps shutting off and on after it reaches 81. It comes on for5 seconds, I hear the burner go on, warm water flows, and then it shuts off. After about 2 minutes, it turns on again.
I did some research here to try and troubleshoot and figured it was low RPM of the pump, but I have a VF pump so I tired increasing the GPM. Didn't work. Now the heater constantly restarts. Another thing I noticed in the pump status is the. "Filter Error" message. I haven't been able to locate what that means or how to fix it.
Thank you
Regards