dauntlesst
05-31-2015, 09:34 AM
Started up pool for season and the LM3 failed me--no flow light, single amber light. Long story short--used Zodiac's trouble shooting guide and did the following:
-replaced cell (didn't work), ensured once again that water was balanced and had correct ppm level of salt
-Ordered and installed main board and communications board (under the push buttons)
IT WORKED
Oh, wow--did the happy dance. Checked to ensure all buttons communicated-great effervesce in the tube. Came back an hour later to be happy again.
NOTHING. DEAD. I can't find the fuse on its board. What else? I am not an electrician. Just a pool owner who has done her own work because I get frustrated with pool companies.
Thanks!
-replaced cell (didn't work), ensured once again that water was balanced and had correct ppm level of salt
-Ordered and installed main board and communications board (under the push buttons)
IT WORKED
Oh, wow--did the happy dance. Checked to ensure all buttons communicated-great effervesce in the tube. Came back an hour later to be happy again.
NOTHING. DEAD. I can't find the fuse on its board. What else? I am not an electrician. Just a pool owner who has done her own work because I get frustrated with pool companies.
Thanks!