telston
05-20-2014, 08:56 AM
I have an error code 170 that indicates I have a low voltage. I can unplug the sensor and the error goes away but comes back once I reconnect. Everwhere I read they say it could be the sensor, but I would like to know how I can test it to be sure it's the sensor and not the board?
Any testing suggestions?
PoolDoc
05-21-2014, 06:33 PM
This is the most extensive trouble shooting info I've found:
https://www.inyopools.com/manuals/1665/jandy-aqua-pure-error-codes.pdf
And, from Jandy:
http://www.zodiacpoolsystems.com/~/media/Zodiac/Global/Downloads/H/H0325600.ashx
http://www.zodiacpoolsystems.com/~/media/9DD79DFAE8A441AE8E80289ABB0216B4.ashx
http://www.zodiacpoolsystems.com/~/media/Zodiac/Global/Downloads/H/H0331400.ashx