capool
05-19-2014, 01:14 AM
We are installing a 17x35 shotcrete pool with a 7x8 spa and automatic pool cover. The coping was just poured. I would like to have a pool controller that is compatible with my iPhone/ipad. Our original contract was for an Easytouch controller and a remote control. The remote control is an extra $3350. My pb has said that if we want the smartphone capability we should get the Pentair Screenlogic wireless connection kit and Screenlogic kit with pc interface. He is charging us an additional $800 for the smart phone capability. This seems like a lot for the Screenlogic pc kit. Is this something we can add on our own?
Do we even need the $3350 remote control if we get the Screenlogic2 interface kit and use our iphone/ipad?
Thank you!
PoolDoc
05-20-2014, 09:09 PM
You're asking the WRONG guy: my opinion on electronic pool controllers is that 90% of them should never be installed, since they have no genuinely useful function.
If you have a solar system or an automated pool/spa switch-over, or an intermittent infinity edge or fountain . . . maybe. But otherwise I tend to seem them as expensive gizmos that will break, interfere with the pool's operation, and be hard to repair.
That said, a lot of people like them AS LONG AS THEY WORK.
So . . . get the system that someone LOCAL and TRUSTWORTHY will repair. It's useless to get a super system that nobody near you can service. Also, put surge protection on the system! You're in S Calif, so it's not an issue like it is here in the the east. But even in Calif you get surges when transformers overheat and go BANG!
Put one of these pool-rated protectors on your controller, and another on any VS pump you get:
Intermatic PS3000 Pool and Spa Surge Protective Device (http://www.amazon.com/exec/obidos/ASIN/B00I506Z3S/scouscho-20/)
(. . . membership upgraded.)