PDA

View Full Version : Aqua Rite motherboard replacement wiring



noelbowman
11-25-2012, 10:56 PM
OK, so my motherboard was fried (2 very black spots burned thru). It is an old system, and the motherboard changed in 10/04 I think. The fuse is different now. So I pull the orange and yellow wires and put in the new fuse. Thing is, I accidentally also pull the orange and yellow wires off the regulators. Unfortunately, there are 2 open connectors on each regulator--- one is unused. And I do not remember which one it was.

Can someone tell me where the other end of the yellow and orange wires connect (upper right corner, or....etc)?

Thanks,
Noel

noelbowman
12-01-2012, 11:32 AM
Anyone?

Anybody willing to just pull the 2 screws that hold the faceplate and take at look for me?

Thanks

mas985
12-17-2012, 02:49 PM
It should be one of the these pictures, no?

https://www.google.com/search?num=50&hl=en&newwindow=1&safe=off&q=aquarite%20circuit%20board&um=1&ie=UTF-8&tbm=isch&source=og&sa=N&tab=wi&ei=OHfPUMvXN6bjiwKs5IHACw&biw=1069&bih=551&sei=OXfPUNLEM4K1iwLq5IGYCQ

JimK
12-23-2012, 10:38 PM
Sorry for the late reply. Don't know if you found your answer yet (did you try calling the manufacturer?), but if not, I'd be happy to take a peek at my Aqua Rite and let you know what I see.