vickeybear
07-14-2012, 11:39 AM
I need some advice on my testing results. I have an InTex 12ft x 24ft rectangle ag pool with swgc. My water is crystal clear and soft.
Fc= .5 - 1
Borates. 30
Cya. 100
Ph stays steady at 7.2
Alkalinity. 110
My question is should I leave it alone or try to get my results more perfect. I have read several places about how much my fc should be and it seems that I am running lower than normal, and my alkalinity a little high. I wonder if I'm heading for trouble if my test results aren't exact. I am using the tfs kit from this site to take my measurements.
Thanks for any advice!
Vickeybear
Fc= .5 - 1
Borates. 30
Cya. 100
Ph stays steady at 7.2
Alkalinity. 110
My question is should I leave it alone or try to get my results more perfect. I have read several places about how much my fc should be and it seems that I am running lower than normal, and my alkalinity a little high. I wonder if I'm heading for trouble if my test results aren't exact. I am using the tfs kit from this site to take my measurements.
Thanks for any advice!
Vickeybear