Rusty brown spots

[LoracRingo]

I believe my ph was too high and I now have brown, rusty type spots on the sides and bottom of pool. what is the best thing to treat them with? My pool store gave me stain preventer but I'm just not sure if it's what I need. I would appreciate any help. Thank you.

[aylad]

Do you have metals in your fill water? If so, which ones? If you're not sure, take a sample to your pool store and see if they will test for them. Is the inside of your toilet tank stained brown, if you filled the pool from your tap water?

Try putting a vitamin C tablet on the spot and see if it changes in appearance. Also, please post a set of test results on your water, taken with a drop-based kit (no strips!!) for us to look at, and that might help us advise you better.


Welcome to the forum!

[PoolDoc]

Janet's vitamin C trick will tell you if the problem is iron staining or something else. If it's metal, "stain preventer" is too late; you need the stain removal process.

From our pages of standard answers:

+ It's much easier to answer your questions, when we have the details about your pool in one place. We often 'waste' the first few posts back and forth collecting information. So, please complete our new Pool Chart form -- it takes about 30 seconds, but will save much more than that.
Pool Chart Entry Form (http://goo.gl/cNPUO)
Pool Chart Results (http://goo.gl/PXaLu)

+ Get a cheap OTO (yellow drops) / phenol test kit, or if available at YOUR Walmart (check availability (http://www.walmart.com/ip/HTH-6-Way-Test-Kit/17043668)), get the HTH 6-way DROPS test kit, which is compatible with the Taylor K2006. Test the pool as soon and you can, and post the results. If you get the 6-way kit, ALSO test the water you FILL the pool with, especially if it's a well, and post THOSE results as well. (The HTH is the best available kit you're likely to find locally, but it's not the K-2006. It can only provide rough measurements chlorine levels above 5 ppm, and it measures "TOTAL" hardness, rather than "CALCIUM" hardness, which is not ideal.)

+ Having a good test kit makes pool care easier for EVERYONE. A good test kit means a kit that can test chlorine from 0 - 25 ppm, pH, alkalinity, calcium hardness, and stabilizer with reasonable accuracy. Test strips (AKA 'guess-strips' ) do NOT meet this standard. Some pool store testing is accurate; most is not. The ONLY way you'll know whether your pool store is accurate or bogus, is by testing accurately your own self. On the other hand, pool store 'computer' dosing recommendations are NEVER trustworthy -- ignore them. They are designed to sell more chemicals than you need, and WILL cause many pool problems.

+ We recommend the Taylor K-2006 test kit, which meets the requirements above, for many reasons. The HTH 6-way drops kit is a great starter kit, and is compatible with the K2006 (it's made by Taylor). There are a few alternatives; for example Lamotte makes an FAS-DPD kit that's OK -- but it costs 3x as much. But, we're not aware of any test that is better, and since we are all familiar with the K-2006 (and can help you with it) we recommend it exclusively ( Test kit info page (http://www.poolforum.com/pf2/showthread.php?16551) )

One caution for the 2012 season: Amazon does not stock the kits directly. So when buying at Amazon, Amato is our current preferred seller. However, they often don't list enough stock to last the whole day, so try order mid-morning. You should expect a delivered cost under $60 for the K2006A and under $95 for the K2006C. If you can't find that, wait a day.

+ Here are links to the kits we recommend:

HTH 6-Way Test Kit (http://www.walmart.com/ip/HTH-6-Way-Test-Kit/17043668) @ Walmart
Taylor K2006A (3/4 oz bottles) (http://www.amazon.com/exec/obidos/ASIN/B0002IXIIG/poolbooks) @ Amazon
Taylor K2006C (2 oz bottles) (http://www.amazon.com/exec/obidos/ASIN/B0002IXIJ0/poolbooks) @ Amazon