View Full Version : polaris 280 pulls away from hose?
vinouspleasure
06-20-2012, 09:43 PM
Hi,
our polaris 280 keeps detaching from the feed hose. I'm just pushing the feed hose on to the cleaning unit, am I missing a nut or swivel or something?
tia,
aylad
06-21-2012, 08:00 AM
Not sure about the 280, but the 360 and 380 have a large white plastic nut that, once you push the hose onto the unit, screws on to keep it in place. I would assume the 280 should have this, too...
Janet
vinouspleasure
06-23-2012, 09:25 AM
Not sure about the 280, but the 360 and 380 have a large white plastic nut that, once you push the hose onto the unit, screws on to keep it in place. I would assume the 280 should have this, too...
Janet
thanks, does the hose connect directly to the cleaner or is there a swivel that connects the hose to the unit and then the feed hose nut goes around the feed hose?
aylad
06-23-2012, 07:42 PM
On the units that I've had, the hose plugs into the top of the unit and then the screw-on nut fastens it. The swivel is higher up the hose...
Janet