PDA

View Full Version : Intex 15' x 42"



jazj10355
06-08-2012, 09:35 PM
I am very new to this pool. We had it last year but didn't do much with it.
Now we are trying to start good and keep it going.
We filled it last Saturday and the kids have swam twice. I got a HTC testing kit today.
I tested the water and everything was low. I have added PH plus and got the levels up to 7.2. Everything else is still low. I have read over the beginners post and am still a little confused.
How much bleach do I need to put in the pool to get it at the right level?
How do I need to tackle the chemicals?
Is it PH, then chlorine then Cyanuric acid?
Any help would be great. The kids want to swim tomorrow.

Watermom
06-09-2012, 07:59 AM
We are going to need some actual numbers to be able to help you. Also, what is the volume? I don't know what an HTC testing kit is today. By chance do you mean HTH and if so, is it the 6-Way drops kit (not test strips)?

Welcome to the Pool Forum!

PoolDoc
06-10-2012, 10:16 PM
Here's a basic summary:

================================================

+ When we say "Walmart", we don't necessarily mean Walmart. You can find most of these products elsewhere. But, WalMart is a known quantity, and other stores are not so much. For example, other stores have been selling store brand bleach at concentrations other than 6%, mostly lower. And, the HTH 6-way DROPS test kit -- an excellent starter kit -- is (AFAIK) available ONLY at Walmart, and not all of those.


+ Get a cheap OTO (yellow drops) / phenol test kit, or if available at YOUR Walmart (check availability (http://www.walmart.com/ip/HTH-6-Way-Test-Kit/17043668)), get the HTH 6-way DROPS test kit, which is compatible with the Taylor K2006. Test the pool as soon and you can, and post the results. If you get the 6-way kit, ALSO test the water you FILL the pool with, especially if it's a well, and post THOSE results as well. (The HTH is the best available kit you're likely to find locally, but it's not the K-2006. It can only provide rough measurements chlorine levels above 5 ppm, and it measures "TOTAL" hardness, rather than "CALCIUM" hardness, which is not ideal.)


+ Having a good test kit makes pool care easier for EVERYONE. A good test kit means a kit that can test chlorine from 0 - 25 ppm, pH, alkalinity, calcium hardness, and stabilizer with reasonable accuracy. Test strips (AKA 'guess-strips' ) do NOT meet this standard. Some pool store testing is accurate; most is not. The ONLY way you'll know whether your pool store is accurate or bogus, is by testing accurately your own self. On the other hand, pool store 'computer' dosing recommendations are NEVER trustworthy -- ignore them. They are designed to sell more chemicals than you need, and WILL cause many pool problems.


+ We recommend the Taylor K-2006 test kit, which meets the requirements above, for many reasons. The HTH 6-way drops kit is a great starter kit, and is compatible with the K2006 (it's made by Taylor). There are a few alternatives; for example Lamotte makes an FAS-DPD kit that's OK -- but it costs 3x as much. But, we're not aware of any test that is better, and since we are all familiar with the K-2006 (and can help you with it) we recommend it exclusively ( Test kit info page (http://www.poolforum.com/pf2/showthread.php?16551) )


+ If you have a freshly filled vinyl pool, you can generally get by for awhile without the K2006, as long as you have an OTO kit (not: 'guess-strips'!!). However, there are three cases where you need a K2006 ASAP: You have a concrete pool, with scaling OR corrosion. You have a problem with metals or staining. You have a SWCG (Salt water chlorine generator) and possible scale build up.In most cases, until you have a K-2006, all we can do is help you keep it from getting worse.


+ Pool stores often tell you MUST do this or that, right away. But, with few exceptions, there are only 3 chemical "MUST-FIX-NOW!" situations: Low chlorine, and pH above 8.0 or below 7.0 Pool freshly filled with metal containing well waterOtherwise, ignore their "you must do X, or your pool will become a nuclear hazard site!" type warnings.

+ There are 3 critical pool chemical levels: chlorine, pH, and stabilizer. If you don't know your stabilizer level, we won't be able to help much till you do. Read the Best Guess page ( poolsolutions.com/gd/best-guess-swimming-pool-chlorine-chart.html ) for more information.


+ Buy some plain 6% household bleach, about 10 gallons per 10,000 gallons in your pool. You can switch to other products, later. But bleach will work, in almost any sort of pool mess, without complicating side-effects.


+ If you need stabilizer, and have access to a Sams Club, buy their 24lb pack of 1# bags of 100% dichlor shock. Each bag will add about 7 ppm of chlorine, and about 6 ppm of stabilizer, per 10K gallons of water. Otherwise, order dichlor from Amazon:
Kem-Tek Dichlor 22 lbs (http://www.amazon.com/exec/obidos/ASIN/B0030BEHZA/poolbooks)We do NOT recommend buying dichlor locally, otherwise, at least until you are an EXPERT reader of chemical labels. The chlorinating pool chemicals sold at Walmart, Kmart, Costco, and most other local stores are diluted blends, sometimes with copper and other products with bad side-effects.


+ Do NOT add pool store goop -- phosphate removers, clarifiers, flocculents, metal 'removers' & sequestrants, and especially, algaecides -- without instruction from us, or at least, a VERY specific reason for doing so. All of those products have side effects that you probably don't understand yet. Most are sold to pool owners who do NOT need them. Many will make things worse if over-used. Some (algaecides, phosphate removers) usually make things worse if used at all. Rarely, you may actually NEED one of those products.


+ It's much easier to answer your questions, when we know something about your pool. We often 'waste' the first few posts back and forth collecting information. So, please complete our new Pool Chart form -- it takes about 30 seconds, but will save much more than that.
Pool Chart Entry Form (https://docs.google.com/spreadsheet/viewform?formkey=dHBLTzdpX19DZVlzUTRLOTU5ZFlZSWc6M Q)
Pool Chart Results (https://docs.google.com/spreadsheet/ccc?key=0Ahjo2iDF0aJgdHBLTzdpX19DZVlzUTRLOTU5ZFlZS Wc)

================================================

PoolDoc
06-10-2012, 10:19 PM
You've got around 3700 gallons, for a PF of 30. Among other things, that means a gallon of PLAIN 6% household bleach will add about 15 ppm of chlorine to your pool. So, if you add about 1/4 (or a little less) of a gallon to your pool EACH evening, that will keep your pool from getting messed up, while you figure things out.

And . . . please do fill out the chart.

PoolDoc
06-11-2012, 08:51 PM
moved this thread where it belongs, so you can post. Sorry. Ben