View Full Version : Robotic cleaner for vinyl in ground pool
jules0804
05-27-2012, 09:10 PM
Hi - I have a 24' X 15' vinyl IG pool. I bought a Kreepy Krauly but think I will return it - it keeps getting stuck on where my wedding cake stairs meet the wall, and skips areas of the pool. What robotic cleaner do you recommend, that will do a good job, and be safe for my lining?
PoolDoc
05-27-2012, 09:28 PM
registration upgraded. -ben
CarlD
05-27-2012, 09:30 PM
TRUE robotics, like AquaBot, Red Devil, Dolphin, and Blue Diamond can be quite pricey. However, they can do a really nice job. My favorite is the Blue Diamond and have been using it for years. It won't clean your steps, though.
PBLsQuad450
05-28-2012, 08:56 AM
I have posted this before... Depends on how you want your pool? To me anyway. I have the very pricey Aquabot and it regularly watches me vacuum my pool from the garage window. I prefer clean to "picked up." I know that auto vacs are hugely popular and I am the very, very small minority opinion, but vacuuming by hand allows me to brush my liner too. Once I have the pool in maintenance mode I do the bottom and one side wall completely each week (maybe veery 5 or 6 days is more accurate). I use major filter pressure on my VAC head, which I am aware has liner damaging potential. I have come close. That said, between testing and adding Cl and cleaning out the skimmers and vacuuming I don't spend more than 2 hours each week on my pool. And that 2 hour average is taking into account start up and storm cleaning (in the avarage). Without those, knock it back to a bit under an hour and a half.
shutitdown
06-20-2012, 12:54 PM
Hi - I have a 24' X 15' vinyl IG pool. I bought a Kreepy Krauly but think I will return it - it keeps getting stuck on where my wedding cake stairs meet the wall, and skips areas of the pool. What robotic cleaner do you recommend, that will do a good job, and be safe for my lining?
Dolphin M4..I highly recommend. See my other post for details.
http://www.poolforum.com/pf2/showthread.php?16926-Dolphin-M4-by-olesIV-aniv&p=94753#post94753