PDA

View Full Version : Amount of borax to use to raise pH



tcward
05-14-2012, 01:38 AM
We have an above ground pool, 5,000 gal. Needing to know how much to add and how much raise. Also how long after adding to test.

PoolDoc
05-14-2012, 11:23 AM
Given that we know NOTHING about your pool, 1/4 of a box, added SLOWLY to the skimmer is a reasonable dose. Again, better info depends on specifics you haven't provided, but in general pH levels above 7.0 and below 8.0 may be acceptable.

If you don't have a kit, you need to look at the kit info page in my signature.