Lost Parts

[jhk49]

I have a Taylor K-2006 test kit. I lost the caps for my comparator. I am getting tired of using my palm to close off the test comparator when shaking to mix for the pH reading. I have resigned myself to knowing that I will most likely have to purchase a new comparator in order to get the caps. That is OK since my comparator is getting a little rough. However, I need a website where I can find the same type of comparator that I now have. It only shows the pH color scale and the scale for discerning cyanuric acid ppm.

Does anyone have a good site for me to get these parts without the purchase of a new kit? I have tried Amazon and they don't seem to have this type of comparator.

[kelemvor]

You can buy the comparator (with caps) from Taylor here: http://www.taylortechnologies.com/products_Partinfo.asp?MarketID=-1&ReplacementPartID=2024 or on various amazon resellers here: http://www.amazon.com/Replacement-Comparators-Taylor-2000-Series/dp/B0002KQE6C/ref=sr_1_1?ie=UTF8&qid=1336342301&sr=8-1

Either way, it's around 10 bucks plus shipping.

It's Taylor part# 9058

[Watermom]

Call Taylor. They might just send you some.