Shawdaddy1972
05-06-2012, 09:50 AM
I am about to pull the trigger on a 33'x54" AG pool. I want to go with a cartridge filter. Will the pentair 420 sq ft filter system do the job? Can I go smaller? Thanks for any help. Below is a link to the filter.
http://www.pentairpool.com/pool-pro/products/filters-cartridge-clean-clear-plus-filters-27.htm
PoolDoc
05-06-2012, 05:00 PM
Let's work this out the right way.
33' x 54" pool => actual water volume = 15.5^2 * pi * 4 * 7.48 = 22,600 gallons (at the 48" water line)
6 hour turn over rate = 22,600 / 6 / 60 = 63 gpm; 8 hour turn over rate = 22,600 / 8 / 60 = 47 gpm;
Target flow => 60 GPM on HIGH
Commercial cartridge filter rates = 0.375 gpm / sft ; Required sft for pool => 60/0.375 = 160 sft
So the 175 sft Hayward would be fine:
http://www.a1poolparts.com/-strse-259/Hayward-Star-dsh-Clear-Plus-Cartridge/Detail.bok
as would the 200 sft Pentair
http://www.a1poolparts.com/-strse-1415/Pentair-Clean-%26-Clear/Detail.bok
============== Not finished - I'll try to get back to this ===============