iBrew
07-18-2011, 06:27 PM
Been gone for an extended weekend (where nothing was added to the pool) and came back to some cloudy water. We just added roughly a half gallon of bleach to the pool to get the chlorine levels up since it was basically non existent. I am pretty new at all this and managed to have crystal clear water up until now. The pool has been up and filled for a month.
Pool Specs:
18' diameter
Steel sided 52" walls
~7,200 gallons
Water Chemistry:
I have the Taylor K2006 test kit and used it to get these results... after 20 minutes of circulating the chlorine.
FC: 4.6 (I added 23 drops to a 25ml sample to get it to turn clear)
TC: .2 (can this be?)
pH: 7.3
TA: 50
Ca: 50
CYA: a touch lower than 30, probably 25
I would greatly appreciate the help in getting things back up to normal. I have about 4 gallons of bleach on hand so if I need to dump some in, I'm ready.
Thank you,
Eric
Pool Specs:
18' diameter
Steel sided 52" walls
~7,200 gallons
Water Chemistry:
I have the Taylor K2006 test kit and used it to get these results... after 20 minutes of circulating the chlorine.
FC: 4.6 (I added 23 drops to a 25ml sample to get it to turn clear)
TC: .2 (can this be?)
pH: 7.3
TA: 50
Ca: 50
CYA: a touch lower than 30, probably 25
I would greatly appreciate the help in getting things back up to normal. I have about 4 gallons of bleach on hand so if I need to dump some in, I'm ready.
Thank you,
Eric