AG Pool Cove - In Canada

[nicker]

Does anyone know where I can buy AG Pool Coving. I would prefer to get it in Ontario Canada. Most of the stores I phone in my area (London Ontario) don't have it or it seems very outragous prices.

Thanks

[matt4x4]

Personally, I would not bother spending the money on it, I also looked into it and the stores up here DO want a kings ransome for it, you can do a better job using sand.

[nicker]

I hear ya on the sand but I am using a foam base instead of sand

[hrsdennis]

Hi Nicker, I have a link on my site that goes to Wards. They charge $6.99 for each 24" section. With a foam base you do need these.

Best of luck, Dennis

[AquaBill]

I got mine last year from Naborhood Pool & Spa in London. They were the least expensive of the places I called....Bill

[matt4x4]

Possibly DJ's pools in Brantford, Do NOT go to Hooton's or Pioneer, they're overpriced

[JoshU]

You should contact Gladon, the company that makes pool cove. They can probably help you out.

www.gladon.com

[nicker]

Thanks AquaBill, that is where I ened up getting them too. Cheapest.

Did you use a foam bottom as welll and if so hows that working for you?

[AquaBill]

Hi Nicker - It's been awhile since I checked this post. I did not use a foam bottom. I used something call 'filtercloth' that came from "Form & Build" in London. It is a synthetic woven material. I just wanted something between the sand and the liner for some protection from the things in the ground that dig little tunnels.